MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Reload this Page Pistons??
Register FAQ Members List Calendar Mark Forums Read

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-17-2003, 01:38 PM   #2
ultraflo
NX dealer-man
 
Join Date: Sep 1998
Location: Peoria, Illinois
Posts: 977
Default
Quote:
With 10:1 and 2.02's, I can't run that much lift.
You should be fine... I ran 10-10.5:1 compression with 2.02" Edel. RPM heads (60cc) last year with a 230°/238° .600"/.600" lift cam and had over .125" P/V clearance.

I would recommend JE/SRP pistons... as they are a much higher quality, IMHO, than the Keith Black pistons. However, they are a bit more pricey, but you get what you pay for.
__________________
RLS Racing!

93 LX
9.20 @ 147mph

03 Mach 1
12.39 @ 116mph
ultraflo is offline   Reply With Quote
 

« Previous Thread | Next Thread »

Thread Tools
Display Modes Rate This Thread
Threaded Mode Threaded Mode
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
393 pistons Ieatcamaros Windsor Power 0 03-24-2004 10:02 PM
Largest cam in 351W without cutting the pistons (Looking at AFR185s) Fox Body Windsor Power 10 06-15-2003 12:39 AM
Cutting valve reliefs into early pistons QuantumMotorsports Windsor Power 11 05-14-2003 09:22 PM
Pistons for Larger Valves? MustangChile Classic Mustangs 4 02-28-2003 01:27 AM
What type of pistons should i get? :) chickendreamer Windsor Power 14 09-12-2002 09:52 PM


All times are GMT -5. The time now is 04:32 PM.

Archive - Top

SEARCH