MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-04-2001, 02:16 PM   #1
rbatson
Guest
 
Posts: n/a
Post

The car was hot and I left the ignition on so that the fan was running, to try to cool the car down, and was leaning over the front of the car looking under the hood. I felt a very light breeze coming from in from of the grill, very light(didn't think too much of it at the time). Days later I was thinking about it and took a thin piece of cardboard and eased it between the fan and engine. It would blow the cardboard towards the engine until it got close to the center of the fan and it would start pulling it. The dang fan was blowing all that engine heat right into the rad and I couldn't go 15 miles without it boiling over. We checked to make sure it was wired right into the car and it was, but it was definitely blowing the wrong way. We dropped the fan and I opened the little box on the fan I switched a couple wires and presto the fan was blowing the right direction . Funny thing, I got the fan cheap because the guy said he didn't like the fan .

I was getting advise from everyone around here, my mechanic, mechanics at work, anyone.. I got advise like "must have air pockets" "maybe you have a clog somewhere" "have you checked the heater core?" I have a bald spot from scratching my head trying to figure it out(heeh).
  Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ported e7's? bailey_57 Windsor Power 28 07-15-2004 07:54 PM
aluminum heads wht04gt Modular Madness 2 01-29-2004 01:57 PM
Edel. non-smog to AFR smog legal heads? What do you guys think? Simi Stang Windsor Power 10 06-19-2003 11:14 PM
question about explorer heads 82 GT Windsor Power 0 04-25-2003 02:56 PM
Urgent Help!!!!Just installed aluminum heads on backwards...Will it work OK??? tb Windsor Power 5 12-31-2001 12:53 AM


All times are GMT -5. The time now is 03:43 PM.


SEARCH