Brackets

blk88lx · 10-21-2003, 07:50 PM

Hey all,
I am trying to put the same engine bracket set up I have in my EFI 5.8 GT into my 5.8 powered 78 F100. Anyway, I still need the 351 swap bracket, the p-steering bracket and the belt tensioner.
Where can I get a standard 302 belt tensioner and p/s bracket? Were the brackets the same in the 5.0 EFI crown vics as they were on 87-93 Mustangs?

SmokinStangGT · 10-22-2003, 01:41 AM

i think that they are the same... and check your local junkyard for them.. i know they have plenty at ours! Good luck!

mustangcobra_91 · 10-22-2003, 02:01 PM

you might try ebay. i see them all the time on there and they usually go for pretty cheap.

10-21-2003, 07:50 PM	#1
blk88lx Registered Member Join Date: Jun 2001 Location: Fort Leonard Wood, MO Posts: 179	Brackets Hey all, I am trying to put the same engine bracket set up I have in my EFI 5.8 GT into my 5.8 powered 78 F100. Anyway, I still need the 351 swap bracket, the p-steering bracket and the belt tensioner. Where can I get a standard 302 belt tensioner and p/s bracket? Were the brackets the same in the 5.0 EFI crown vics as they were on 87-93 Mustangs? __________________ 93 GT, 5.8 EFI usual bolt ons, 3.55's, subs, hurst, K+N 78 F100 Short bed, 5.8, dual pipes 4 bbl 03 Sable

10-22-2003, 01:41 AM	#2
SmokinStangGT Registered Member Join Date: Sep 2002 Location: IL Posts: 105	i think that they are the same... and check your local junkyard for them.. i know they have plenty at ours! Good luck! __________________ 89' GT with 5spd Hurst short throw, Keith Black 12:1 comp. pistons, Sealed Power drag racing rings, Fms F303 Cam, Ported and polished upper and lower intake with Ported E7TE heads that contain comp. cam double coiled springs with titainum locks and steel retainers, Fel-Pro Head Gaskets, 9mm ford racing wires, BBK chrome unequal shortys, Power Throttle bodies 70mm, Edlebrock 70mm EGR plate, 15inch K&N, Bassani X-pipe, Flowmaster 40 series, Eibach 1 1/2 lowering springs, Cobra R rims 17X9 with p235 on front and p275 on rear with Falken Zeix tires-RUNNING!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
confused about how alternator brackets mount	82 GT	Windsor Power	5	10-01-2003 02:19 AM
confused about how alternator brackets mount	82 GT	Classic Mustangs	1	09-30-2003 08:12 PM
Accessory brackets	94snake	Windsor Power	1	02-28-2003 11:45 AM
Need help with engine brackets	MustangAggie66	Classic Mustangs	0	08-08-2002 12:48 PM
A/C brackets	selecstangs	Windsor Power	0	12-21-2001 02:55 PM

10-22-2003, 02:01 PM	#3
mustangcobra_91 Registered Member Join Date: Feb 2001 Location: amarillo tx united states Posts: 10	you might try ebay. i see them all the time on there and they usually go for pretty cheap.