What year and type of motor do I have..

Smokedawg · 08-15-2001, 04:13 PM

My 347 has awesome torque from about 0 to 80...Then its still nice up to 100..
This motor isnt for my car, I am building it for my girlfriend. A buddy of mine has a 90GT 5-speed with a practically shot motor that he wants to sell CHEAP. So she asked if she gave me the money if I would build this up for her. So I was wanting to get all of your guys opinions on this motor and not make the same mistake that I did on my 347...The last mods that I want to do for my 347 is a Edelbrock or trick flow intake, 1.7 rr's, 190lph fuel pump..I think thats about it.

I will take the shot motor out of the 90gt and might bore it to a 306 also and put a decent cam, 306 pistons, and just port the heads and have them milled then sale it.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Type Transmission	Kisner	Classic Mustangs	1	02-03-2001 11:30 PM

08-15-2001, 04:13 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	My 347 has awesome torque from about 0 to 80...Then its still nice up to 100.. This motor isnt for my car, I am building it for my girlfriend. A buddy of mine has a 90GT 5-speed with a practically shot motor that he wants to sell CHEAP. So she asked if she gave me the money if I would build this up for her. So I was wanting to get all of your guys opinions on this motor and not make the same mistake that I did on my 347...The last mods that I want to do for my 347 is a Edelbrock or trick flow intake, 1.7 rr's, 190lph fuel pump..I think thats about it. I will take the shot motor out of the 90gt and might bore it to a 306 also and put a decent cam, 306 pistons, and just port the heads and have them milled then sale it. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.