Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
01-08-2004, 06:56 PM
|
#1 |
|
Registered Member
Join Date: May 2000
Location: Ontario,Canada
Posts: 233
|
Sounds as though you still have the stock TB on the intake. Since the stocker is 60mm.
Your best bet would be to go with a 70mm if you plan on keeping it N/A, but if you plan on adding a s/c then get a 75mm. But when you increase the TB you will need to get a bigger MAF meter, a 75mm to 80mm would work well. I've never heard of a larger MAF giving computer problems unless its not calibrated properly for the injector sizes. If you do get a larger MAF, make sure its calibrated for the 19lbs injectors, unless you upgrade those aswell. Good luck.
__________________
1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 86-93 MUSTANG Throttle Body Bypass Kit +8HP | lucheski | Windsor Power | 11 | 06-14-2004 01:19 AM |
| Need Throttle Body & Idle Conrol Valve Info | BigBobsL | Windsor Power | 2 | 02-10-2004 01:16 AM |
| Bbk/edelbrock Throttle Body Sticking | sn95gt19 | Windsor Power | 4 | 06-25-2002 02:01 PM |
| Will A Throttle Body Do Much For Ya With Minor Mods? | steedamustang01 | Modular Madness | 15 | 04-15-2002 10:38 PM |
| Throttle Body | 96Saleen | Modular Madness | 1 | 08-22-2001 11:00 AM |