need pics of fenderwell CAI

GhettoPop · 02-26-2004, 11:58 AM

coming off my old post on mounting location for MSD6A, i think i might pick up a fenderwell CAI. are there any power gains with a fenderwell CAI vs. stock airbox w/ K&N filter and removed air silencer? or is it a waste of $$$?

also, can anyone posts some pics of installed fenderwell CAI's?

i just want to get a general idea of the amount of room I will have to mount the msd. i also figured that a ferderwell mount CAI will draw more cold air than a standard CAI conical filter in the engine compartment, is this true? thanks.

mustangman4 · 02-27-2004, 04:39 AM

With a fenderwell kit that goes through the stock opening will not give you enough room or less you mount it on the ledge below. Although I can recomend an Anderson Ford powerpipe that goes through the round hole next to the stock location. More expensive but guarantee in the long run you wont be dissappointed.

http://www.stangtuning.com/forums/showthread.php?t=886

Ackbar00 · 02-27-2004, 02:23 PM

Pics of mine. Picked up the car alot!!

mustangman4 · 02-28-2004, 11:01 AM

Thats one heck of a cold air intake setup. LOL On a side bar. How was that turbo kit to install? I attached a pic of my setup. Just got done putting the MSD in last night.

Brad

Ackbar00 · 02-28-2004, 08:03 PM

Quote:

Originally posted by mustangman4
Thats one heck of a cold air intake setup. LOL On a side bar. How was that turbo kit to install? I attached a pic of my setup. Just got done putting the MSD in last night.
Brad

Vevy nice looking setup!!

It was fun to install

Took a few months, but I was doing a bunch of other things at the same time. I will say, It is the baddest sound I have EVER heard. Of course Kenne-Bell 03 Cobras are cool sounding too

GhettoPop - Two Words, Anderson Powerpipe. Dont get ANYTHING else. They look mean, make good power, Grow with your setup, and can be had new for $185.

Mike93GT · 03-01-2004, 04:31 AM

Here's the Mac I had. I wrapped it as it tends to pick up a lot of heat off the headers.

Mike93GT · 03-01-2004, 04:33 AM

Here's the Anderson I have now.

BTW, the Mac CAI and polished performer upper are for sale.

GhettoPop · 03-01-2004, 09:21 AM

so do the Anderson and/or MAC CAI's make enough room to mount an MSD6A in that area?

it seems people like the anderson's better, i guess u get what u pay for. my stang is fairly stock, don't think i will need to spend the extra money on andersons right now, but still thinkin bout it.......

Ackbar00 · 03-02-2004, 07:56 AM

Quote:

Originally posted by GhettoPop
It seems people like the anderson's better, i guess u get what u pay for. my stang is fairly stock, don't think i will need to spend the extra money on andersons right now, but still thinkin bout it.......

Noooooo!!! Get the Anderson, it is so ******* cool!! Several of my friends in the area have them and they rule. I was going to get one, till I got the turbo. Plus, it is only like $50 more. Get it for Ackbar, please?

GhettoPop · 03-02-2004, 09:10 AM

Quote:

Originally posted by Ackbar00
Get it for Ackbar, please?

so will the msd fit in that area w/ anderson's?

Ackbar00 · 03-02-2004, 12:39 PM

It should. The pipe goes throught the circular hole near the shock tower. It will need to be enlarged. You can put you MSD stuff right where the Air Box was no problem. I need to dig up a pic.

Ackbar00 · 03-02-2004, 12:45 PM

Others reviews on the pipe
http://reviews.stangnet.com/review.cgi?ID=356

See, You got plenty of room for a MSD.

02-26-2004, 11:58 AM	#1
GhettoPop Gimme a Drink! Join Date: Dec 2002 Location: NYC Posts: 694	need pics of fenderwell CAI coming off my old post on mounting location for MSD6A, i think i might pick up a fenderwell CAI. are there any power gains with a fenderwell CAI vs. stock airbox w/ K&N filter and removed air silencer? or is it a waste of $$$? also, can anyone posts some pics of installed fenderwell CAI's? i just want to get a general idea of the amount of room I will have to mount the msd. i also figured that a ferderwell mount CAI will draw more cold air than a standard CAI conical filter in the engine compartment, is this true? thanks. __________________ 1990 GT,stock T-5,K&N w/o air silencer,March underdrives,FMS wires,timing@14*,PA Perf 130amp alt,Steeda Tri-Ax Shifter,Steeda adj quadrant/clutch cable/firewall adj,Centerforce II clutch,o/r x-pipe,Magnaflow SS catback,g-load brace, subframes,Bilstein struts/shocks,Autometer gauges, 136k and running strong!

02-27-2004, 04:39 AM	#2
mustangman4 Registered Member Join Date: Feb 2003 Location: Oshkosh WI Posts: 69	With a fenderwell kit that goes through the stock opening will not give you enough room or less you mount it on the ledge below. Although I can recomend an Anderson Ford powerpipe that goes through the round hole next to the stock location. More expensive but guarantee in the long run you wont be dissappointed. http://www.stangtuning.com/forums/showthread.php?t=886 __________________ 93 GT 306 DSS, O-Ringed, AFR 185's, Pro Products Intakes, 55lb low imp inj, 80mm Pro-M meter, 2004 PMS, AFM Power Pipe, Kirban Reg, Vortech S-Trim 14lbs. No times yet. Trying to tune.

02-27-2004, 02:23 PM	#3
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	Pics of mine. Picked up the car alot!! __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

03-01-2004, 09:21 AM	#8
GhettoPop Gimme a Drink! Join Date: Dec 2002 Location: NYC Posts: 694	so do the Anderson and/or MAC CAI's make enough room to mount an MSD6A in that area? it seems people like the anderson's better, i guess u get what u pay for. my stang is fairly stock, don't think i will need to spend the extra money on andersons right now, but still thinkin bout it....... __________________ 1990 GT,stock T-5,K&N w/o air silencer,March underdrives,FMS wires,timing@14*,PA Perf 130amp alt,Steeda Tri-Ax Shifter,Steeda adj quadrant/clutch cable/firewall adj,Centerforce II clutch,o/r x-pipe,Magnaflow SS catback,g-load brace, subframes,Bilstein struts/shocks,Autometer gauges, 136k and running strong!

03-02-2004, 12:39 PM	#11
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	It should. The pipe goes throught the circular hole near the shock tower. It will need to be enlarged. You can put you MSD stuff right where the Air Box was no problem. I need to dig up a pic. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

03-02-2004, 12:45 PM	#12
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	Others reviews on the pipe http://reviews.stangnet.com/review.cgi?ID=356 See, You got plenty of room for a MSD. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My pics fm NHRA Races in Baytown :)	Topless In Texas	Blue Oval Lounge	6	04-18-2003 03:19 AM
Wheel database with PICS	EL PAALO	Blue Oval Lounge	2	08-02-2002 10:54 PM
Pics of My Pony! =)	1969Mach1	Blue Oval Lounge	19	04-04-2002 07:04 AM
New pics up (also Re: Exhaust Resonator Removal)	Gautam	Blue Oval Lounge	1	05-13-2001 07:49 PM
You MUST SEE this, SCARY pics inside...	reddragon93	Windsor Power	4	04-07-2001 11:51 PM