

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 | |
Registered Member
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
|
![]() Quote:
but the 99-04GT make 260 hp at the flywheel not the rear wheels when you take into fact the drivetrain takes 15-20%(depending on 5-speed or auto) your looking at 220-230 at the wheeks now the t/b plenum they dont make 11 rwhp they make about 6 and its a waste of over 200 going with the accufab stuff for 1hp the fluids may show 1-3hp not percent and the cams there is no way cams alone on stock heads and stock valve springs and stock header are going to show 20rwhp most I have ever seen with out a bullit manifold and long tube headers is 10rwhp so lets add this up motor(we will go on the high side) 230 t/b and plenum 7 fluids 5 cams 15 total 257rwhp and thats going on the high side plus you will need a chip to get the car to idle with the cams and dyno time to get it all working 10-15 so total 272 now with..... headers P&P heads u/d pullies meizie elec. water pump mid pipe (off road) then you would be looking at 300-315 rwhp but you will need new injectors and fuel pump to have tthe fuel for that kind of power
__________________
RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________ |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
bought nitros!!! expected 1/4 mile times??? | 1jimmy__d | Windsor Power | 25 | 07-15-2002 08:30 PM |
Quarter mile times | 67 Demon | Classic Mustangs | 11 | 05-30-2002 12:40 AM |
Latest ¼ mile times | cad614 | Windsor Power | 3 | 05-18-2002 05:45 PM |
89 Snake 1/4 mile times? | Steve H | Modular Madness | 0 | 09-12-2001 11:51 AM |
What is the stock ET times for the 98GT | gtrc10 | Modular Madness | 4 | 04-03-2000 10:13 AM |