

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#2 |
Registered Member
Join Date: Feb 2002
Location: Arlington, Washington
Posts: 92
|
![]() The problem you are experiencing is your throwout bearing has gone bad and needs to be replaced. It won't hurt anything if you don't fix it right away. I drove with mine that way for so long that when I did fix it I still put my foot on the pedal. When you do change your throwout bearing, Check the input shaft seal as the throwout bearing will wear a groove into the seal shaft. Chances are you may have the stock aluminum input shaft seal and you will want to check on a steel one as they last longer. Hope this is helpful, good luck
__________________
Black 1990 LX DSS Racing Super Pro Bullit 331, AFR 185, Anderson B31 Cam, 1.6 DSS rockers, Cobra Intake w/ 2 phenolic spacer, Aluminum DS, 3.73 gears, Tremec 3550, Lakewood SFI Bellhousing, MSD Digital 6+, Spintech Side Exhaust, |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
where is the clutch pedal position (CPP) sensor located ?? | HAITHAM | Windsor Power | 2 | 09-29-2001 07:11 AM |
clutch problems. long, but please read and suggest. | mgranzow | Windsor Power | 0 | 09-15-2001 12:32 AM |
Clutch Problems | blue302 | Windsor Power | 3 | 09-10-2001 01:37 PM |
Clutch pedal assembly question | 93LxVert | Windsor Power | 0 | 05-07-2001 04:18 PM |
Clutch Pedal | Fostang | Classic Mustangs | 3 | 04-27-2001 03:20 AM |