MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Power Adders
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-21-2005, 10:22 AM   #1
procharge94
Registered Member
 
procharge94's Avatar
 
Join Date: Oct 2004
Location: Gainesville, FL
Posts: 103
Default Re: 95 supercharged 302 heads???

24lb injectors will have a blue top, http://search.ebay.com/24lb-injector...fkrZ1QQfromZR8 . sorry about the link, you can just copy and paste it if you get to this today. I would assume that the car has a decent rear end gear ratio and some moderate suspension mods, if it was a show car.

Depending on how many lbs of boost you are running on the blower, AFR 185's with the Holley intake should put you close to 500rwhp, if not higher with a good tune. In my opinion, this sort of horsepower should not be left to deal its damage to the stock rear end. You will need a few traction devices (panhard bar, torque arm/tri-link, lower control arms, etc.).
procharge94 is offline   Reply With Quote
Old 01-21-2005, 06:50 PM   #2
gr8pny
Registered Member
 
Join Date: Jan 2005
Posts: 3
Default Re: 95 supercharged 302 heads???

this is a "first generation" supercharger with 6 pounds boost at best. I will not be changing the cam. Do you think 400 horses is reasonable? The tires just squeal a little in 2nd gear with the clutch fully engaged....this is just with mashing the pedal. I just want her to have more "roasting" potential...
gr8pny is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help I need heads!! SmokinStangGT Windsor Power 18 05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6 surfbeast Modular Madness 9 11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads slow98 Modular Madness 6 10-25-2002 04:28 PM
GT-40 heads 5.0 Pony Windsor Power 1 09-10-2002 10:26 PM
Which heads are beter? patman Classic Mustangs 3 12-02-1999 03:42 AM


All times are GMT -5. The time now is 12:45 AM.


SEARCH