msd 6 install questions

Ieatcamaros · 02-25-2005, 07:01 PM

FWIW, in my 1989 gt I used the red with light green stripe as a switched 12v source. It is in the gray plug by the master cylinder. I used one of the blue splice connectors to make the connection. I second Jester about the pickup wires. Do not use the white wire. I can't tell you exactly which wires to tap into at the distributor though. You can look at some wiring diagrams on MSD's site if that helps.

~The Jester~ · 02-25-2005, 11:21 PM

Absolutely 100% for sure violet and green go to the distributor. Also 100% the white wire isn't used in your application. But, if you ground it you'll have no spark. Instant anti-theft switch.

http://www.msdignition.com/pdf/6%20series/pdf17.pdf

wayne94mustang · 02-28-2005, 02:13 AM

i mounted mine under the pass side seat........i whent for the clean look

02-25-2005, 07:01 PM	#1
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Re: msd 6 install questions FWIW, in my 1989 gt I used the red with light green stripe as a switched 12v source. It is in the gray plug by the master cylinder. I used one of the blue splice connectors to make the connection. I second Jester about the pickup wires. Do not use the white wire. I can't tell you exactly which wires to tap into at the distributor though. You can look at some wiring diagrams on MSD's site if that helps. __________________ The sig says it all.

02-25-2005, 11:21 PM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: msd 6 install questions Absolutely 100% for sure violet and green go to the distributor. Also 100% the white wire isn't used in your application. But, if you ground it you'll have no spark. Instant anti-theft switch. http://www.msdignition.com/pdf/6%20series/pdf17.pdf __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

02-28-2005, 02:13 AM	#3
wayne94mustang Registered Member Join Date: Feb 2005 Posts: 3	Re: msd 6 install questions i mounted mine under the pass side seat........i whent for the clean look __________________ 94gt q1a k-member,kyb ajustable struts,02 brakes(front),89 mark 7 rear 3.90s,31 spline mosor axles,mega bite jr lowers,boxed uppers,frame ties,c/c plates,comp extrem cam,1.7 rollers,ford racing headers,orr road h,flowmaster tails,24# injecters,pro-m bullit,mac cai,ported stock heads and intake,stand alone tranny computer,2600 stall,transgo shift kit,1999 tranny upgrade and extra clutches,pih kit(a9p computer), and all the little bolt ons

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quick questions on Explorer Intake install.	Falcons Talon	Windsor Power	2	08-21-2003 12:40 PM
New Gears, Install, and Questions	B2r3y	Windsor Power	6	02-21-2003 05:00 PM
Roller Rocker install questions. (long)	chris91LX	Windsor Power	5	03-15-2001 09:32 PM
Electric fan install questions...	chris91LX	Windsor Power	11	02-27-2001 02:07 PM
FMS A/C elim install questions	sedanman	Windsor Power	5	01-30-2001 03:25 PM