New Radiator - Some Questions

Phillyfanfrombirth · 04-22-2005, 05:00 PM

Unless your old one is not the original... your new one (like I have to tell you) should be an exact match.

Now...

Do flush the system. Do replace the thermostat. If the pump has any age or showing any signs of wear, replace it. Hoses (radiator or heater) cracked or just ugly? Replace. Ugly clamps? Replace.

One other thing... depending on how "stock" you want to keep this thing, maybe it might be a good time to look into a tranny cooler, to which I would bypass the radiator altogether.

gbeals · 04-22-2005, 09:21 PM

Well the Radiator place called, and said they made a mistake... SO I'll have my new CORRECT rad here on wed.!

I think I will look into a tranny cooler. Good idea.

Question on the heater. My heater core is in the heater, but none of the duct work or the controls.. Should I have a working heater? Or is it alright to just have the core in place. I have no need for the heater if it is just to keep warm.

04-22-2005, 05:00 PM	#1
Phillyfanfrombirth Registered Member Join Date: Dec 2004 Location: South Central PA Posts: 358	Re: New Radiator - Some Questions Unless your old one is not the original... your new one (like I have to tell you) should be an exact match. Now... Do flush the system. Do replace the thermostat. If the pump has any age or showing any signs of wear, replace it. Hoses (radiator or heater) cracked or just ugly? Replace. Ugly clamps? Replace. One other thing... depending on how "stock" you want to keep this thing, maybe it might be a good time to look into a tranny cooler, to which I would bypass the radiator altogether.

04-22-2005, 09:21 PM	#2
gbeals 68-351W Join Date: Mar 2005 Location: Wilmington Posts: 44	Re: New Radiator - Some Questions Well the Radiator place called, and said they made a mistake... SO I'll have my new CORRECT rad here on wed.! I think I will look into a tranny cooler. Good idea. Question on the heater. My heater core is in the heater, but none of the duct work or the controls.. Should I have a working heater? Or is it alright to just have the core in place. I have no need for the heater if it is just to keep warm.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Couple of quick, stupid questions!	SCOTTLT79	Windsor Power	4	02-15-2003 04:02 PM
Have questions about your blower? J.R. Granatelli attending chat tonight!	88COBRA	Windsor Power	0	02-12-2003 11:59 AM
Quick Help Questions - Need to pass inspection on the 66 Stang!	bigbandjohn	Classic Mustangs	10	01-26-2003 10:14 PM
Nitrous Questions for 99GT	Swarzkopf	Modular Madness	8	01-08-2002 10:16 AM
HELP! Newbie 95-96 GT questions	Ron Brooks	Blue Oval Lounge	7	07-11-2001 07:38 PM