Slight Miss

jimberg · 06-02-2005, 10:22 AM

Just to be clear. Crane tells you not to use solid core wires because of RF issues effecting the box. If you see arcing from the boots to the top of the plugs, there's clearly something wrong with the wires you are using. Did you remember to use dielectric grease to coat the inside of your boots?

I like the MSD wires because they have really long boots that are shapable so you can position them away from the headers. They have a real low resistance and are spiral core so there is low RF coming from them.

289 · 06-02-2005, 11:45 AM

I guess all I can say is DOH
I was afraid of that I know these wire make a crap load of RF because I can't even use my AM radio.
So do you think its just the RF thats screwin it up, do you think i might have damaged something usein these type wires.
Thanks for your input

06-02-2005, 10:22 AM	#1
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	Re: Slight Miss Just to be clear. Crane tells you not to use solid core wires because of RF issues effecting the box. If you see arcing from the boots to the top of the plugs, there's clearly something wrong with the wires you are using. Did you remember to use dielectric grease to coat the inside of your boots? I like the MSD wires because they have really long boots that are shapable so you can position them away from the headers. They have a real low resistance and are spiral core so there is low RF coming from them. __________________ 351W 89 Mustang GT Convertible

06-02-2005, 11:45 AM	#2
289 Registered Member Join Date: Jan 2000 Location: Mount Joy, PA , U.S. Posts: 198	Re: Slight Miss I guess all I can say is DOH I was afraid of that I know these wire make a crap load of RF because I can't even use my AM radio. So do you think its just the RF thats screwin it up, do you think i might have damaged something usein these type wires. Thanks for your input

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
miss then no miss	Just me	Windsor Power	7	11-17-2002 02:43 PM
ATTN PKRWUD: Got a BAD MISS	Coupe Devil	Windsor Power	5	08-06-2002 08:48 AM
Mysterious Miss	ChemicalSmile	Windsor Power	2	05-08-2002 12:32 AM
95 GT miss fire at idle	Mustang Cain	Windsor Power	7	02-24-2002 12:43 AM
BOOSTER or MASTER CYLINDER cause the car to miss up ??	HAITHAM	Windsor Power	13	01-23-2002 01:15 AM