Anyone done this?

Smokedawg · 09-18-2001, 06:34 PM

Thats alot of hp...If you are going with that much, you could choose a 4 cylinder or v8 rolling chasis because you will be replacing just about everything anyway.
You will need 90/10 or 70/30 struts, 50/50 drag shocks, drag springs with airbag, If its drag only, might as well tub it. That will get you great traction. I dont know the specs on the c4. How much tq can it handle?? Are you going to use the 428 or a 302?? You might have to get special motor mounts for the 428, not sure on that though.
You will also need a roll cage. Oh ya, and subframe connectors...

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

09-18-2001, 06:34 PM	#6
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Thats alot of hp...If you are going with that much, you could choose a 4 cylinder or v8 rolling chasis because you will be replacing just about everything anyway. You will need 90/10 or 70/30 struts, 50/50 drag shocks, drag springs with airbag, If its drag only, might as well tub it. That will get you great traction. I dont know the specs on the c4. How much tq can it handle?? Are you going to use the 428 or a 302?? You might have to get special motor mounts for the 428, not sure on that though. You will also need a roll cage. Oh ya, and subframe connectors... ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.