Which heads and how much cam???

nastyn8 · 08-22-2005, 05:35 AM

do you really want a set of 40 year old heads?

~The Jester~ · 08-22-2005, 09:20 AM

Yes, you CAN get more flow from iron heads. But they're 40 years old like Nate said. Go with the edelbrocks, then you can always get them ported later if you want. LOTS of guys are running them, there's tons of meat for porting on those heads.

Cam? That one you listed is moderate, but should work well with the Edelbrock's. Make sure the valve springs can handle the lift.

rwhite65 · 08-22-2005, 07:50 PM

edelbrocks all the way
Ryan

08-22-2005, 05:35 AM	#1
nastyn8 Smokes The Dope Join Date: Aug 2004 Location: Eldorado, Illinois Posts: 144	Re: Which heads and how much cam??? do you really want a set of 40 year old heads? __________________ 88' coupe with a 2.3, displacement replacement in near future. 46' f1 My page

08-22-2005, 09:20 AM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Which heads and how much cam??? Yes, you CAN get more flow from iron heads. But they're 40 years old like Nate said. Go with the edelbrocks, then you can always get them ported later if you want. LOTS of guys are running them, there's tons of meat for porting on those heads. Cam? That one you listed is moderate, but should work well with the Edelbrock's. Make sure the valve springs can handle the lift. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

08-22-2005, 07:50 PM	#3
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: Which heads and how much cam??? edelbrocks all the way Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread: