EFI wiring experts needed!

Mustang_289 · 09-07-2005, 03:24 PM

The EEC relay R/LG wire is tied directly to the ignition switch. When the ignition switch is in the run position power is sent to the EEC relay, fuel pump intertia switch, and the TFI module for ignition. See the attached scan of schematic.

bwoldschool65 · 09-07-2005, 10:38 PM

Alright, so i can just run my own wires from the eec relay connector to the ignition switch , but what all runs through the green 8 pin connector ?

09-07-2005, 03:24 PM	#1
Mustang_289 Registered Member Join Date: Sep 2001 Posts: 512	Re: EFI wiring experts needed! The EEC relay R/LG wire is tied directly to the ignition switch. When the ignition switch is in the run position power is sent to the EEC relay, fuel pump intertia switch, and the TFI module for ignition. See the attached scan of schematic.

09-07-2005, 10:38 PM	#2
bwoldschool65 Registered Member Join Date: Aug 2005 Location: Bruceton TN Posts: 10	Re: EFI wiring experts needed! Alright, so i can just run my own wires from the eec relay connector to the ignition switch , but what all runs through the green 8 pin connector ?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ignition	lmccoy	Classic Mustangs	10	04-28-2005 11:16 AM
Confused, I need help on different fuel pump wiring methods.	5.0 Fiend	Windsor Power	12	10-14-2004 06:43 PM
Which wiring harness and computer do I have to have?	EazyE-CPT	Windsor Power	0	07-21-2002 11:33 PM
possible..87 wiring harness/95 eec iv	selecstangs	Windsor Power	0	12-20-2001 01:52 AM
Wiring harnesses and A9L needed.	2FastLX	Windsor Power	6	11-28-2001 08:08 AM