Fast Idle

Gearhead999 · 09-19-2005, 06:30 PM

If the plates are sticking, find what is causing it and unstick them.

The secondary plates have an allen screw adjustment for the stop on closing. You have to remove the carb to adjust it.

MustangMatt69 · 09-19-2005, 07:02 PM

Hey,
Today I checked, and they dont look like they are sticking at all, The secondaries are completly closed. I noticed that the idle will vary. Sometimes it will be high, and then I rev it a little, and it drops down, and when it is really low, I rev it and it raised the idle. Sometimes it does it when I dont touch anything. The rpms are just all over they place when ever they fell like it. It seems like something is sticking or the electric choke is kicking on and off. Do you think that it is the choke.
thanks alot
matt

09-19-2005, 06:30 PM	#1
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	Re: Fast Idle If the plates are sticking, find what is causing it and unstick them. The secondary plates have an allen screw adjustment for the stop on closing. You have to remove the carb to adjust it. __________________ "Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic

09-19-2005, 07:02 PM	#2
MustangMatt69 Registered Member Join Date: Aug 2005 Posts: 9	Re: Fast Idle Hey, Today I checked, and they dont look like they are sticking at all, The secondaries are completly closed. I noticed that the idle will vary. Sometimes it will be high, and then I rev it a little, and it drops down, and when it is really low, I rev it and it raised the idle. Sometimes it does it when I dont touch anything. The rpms are just all over they place when ever they fell like it. It seems like something is sticking or the electric choke is kicking on and off. Do you think that it is the choke. thanks alot matt

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Idle Problems	BluBisiro	Modular Madness	4	04-18-2005 01:37 PM
Adjusting Length of high idle on Carb 5.0	twilightcall	Windsor Power	8	08-06-2003 08:31 AM
Idle problem and jerking?	69fastback	Windsor Power	10	01-11-2003 05:58 PM
Problems with TFS engine combo..wont idle right and sputters when you give it throttl	dashapht	Windsor Power	8	07-17-2001 12:23 AM
I am over the idle deal	TomEboi	Modular Madness	3	03-24-2001 03:57 PM