Cam question.

ols0051 · 10-22-2005, 07:43 PM

I think for starters I'm going to try what Jeff said, and change out the springs on the dist. Also check all my wires. I did notice that I forgot to put on a ground strap from the block to the chassis, so I'll get that done too. but not tonite. "I have a date with a bottle of captain." track season is over here in wisconsin. got in 1 pass, 18.68@67mph. "I think my truck pulling my 24 haulmark could do that."

~The Jester~ · 10-23-2005, 07:01 AM

Don't swap out the springs yet. What Jeff means is that the MSD distributors sometimes don't give you ALL the advance until 3500. You said you set it at 36* at 2000. What might be happening is the distributor isn't done advancing your timing at 2000. It might be taking you up past 40* at 3500. Leave it alone, and check the timing at 3500 RPM and see what it's doing. Like Andy said, check for vacuum leaks too.

ols0051 · 10-23-2005, 10:22 AM

OK, I'll won't do anything drastic until I get the light on it. I won't have time to get to it until tues night.

10-22-2005, 07:43 PM	#1
ols0051 Registered Member Join Date: Sep 2002 Location: cent.wis Posts: 203	Re: Cam question. I think for starters I'm going to try what Jeff said, and change out the springs on the dist. Also check all my wires. I did notice that I forgot to put on a ground strap from the block to the chassis, so I'll get that done too. but not tonite. "I have a date with a bottle of captain." track season is over here in wisconsin. got in 1 pass, 18.68@67mph. "I think my truck pulling my 24 haulmark could do that."

10-23-2005, 07:01 AM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Cam question. Don't swap out the springs yet. What Jeff means is that the MSD distributors sometimes don't give you ALL the advance until 3500. You said you set it at 36* at 2000. What might be happening is the distributor isn't done advancing your timing at 2000. It might be taking you up past 40* at 3500. Leave it alone, and check the timing at 3500 RPM and see what it's doing. Like Andy said, check for vacuum leaks too. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

10-23-2005, 10:22 AM	#3
ols0051 Registered Member Join Date: Sep 2002 Location: cent.wis Posts: 203	Re: Cam question. OK, I'll won't do anything drastic until I get the light on it. I won't have time to get to it until tues night.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another tire question	96Saleen	Modular Madness	6	02-10-2004 05:27 PM
A stupid question I hate asking about exhaust sound	jwboner	Windsor Power	4	08-05-2003 05:55 PM
simple question	Lonzo	Classic Mustangs	3	09-10-2002 09:37 AM
Question about 2002 Ford Mustang Cd Deck	nissanNICK	Windsor Power	0	03-07-2002 10:08 PM
Newby here, I have a question on Odometers	mustangmama	Blue Oval Lounge	3	03-03-2001 06:43 AM