
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
|
|
#1 |
|
Registered Member
Join Date: Sep 2005
Posts: 41
|
check fluid level first, then pull cover inspect fluid for obvious metal flakes glaze or debris and look for any obvious things. original rear i assume, problably haven't changed the fluid lately, maybe the bearings are going? inspect axles for wear, good time to replace seals at each end while your at it. If the rear is f%cked, year one makes a remanufactured complete year with gear ratios of your choice for under 800$, that beats cost of getting a rear rebuilt by most places, (at least by me in NY) a shop wanted 1,000$ to put in 3.73 gears and a new trac loc in my rear, and not replace anything else, the rear is so easy to do yourself, why pay anyone, I did it with a few jack stands all by myself in a slanted driveway, so anyone can do it!
If you can't afford the complete rear or a rebuild job, rears are cheap and plentiful by me in junkyards, dozens for under 300$ some out of wrecks with aftermarket gears, the guys usually pull them and save them on the side and try to get more money for them, obviously. use the tape trick to determine the ratio, easiest way in a junkyard without pulling covers and counting teeth, and if you don't have a code list on hand, there is a site that has the axle code list, I think it's slowgt.com, not sure.
__________________
88 Lx project. 96 Z28 daily driver. |
|
|
|
|
|
#2 |
|
Import Slayer
Join Date: May 1999
Posts: 2,241
|
I doubt it's a problem with the rearend. I've never heard of an 8.8 having problems under normal use.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| new rear end | fordkid68 | Classic Mustangs | 18 | 11-24-2009 08:05 PM |
| Calling all rear end experts - Please Read | Stang_ROTY | Windsor Power | 6 | 06-09-2005 01:55 PM |
| want rear disk without changing overall length of rear....please help!!! | dragstang86 | Windsor Power | 1 | 07-31-2003 06:32 PM |
| installing cobra rear in my LX...picked up a totaled 93 limited edition | dragstang86 | Windsor Power | 1 | 05-26-2003 11:23 AM |
| Recall 01S15 Rear Knuckle replacement | folthoff | Special Production | 0 | 05-02-2001 08:28 AM |
