I just got my Strange front brakes kit in today for my Falcon.

68Falcon · 12-21-2005, 11:39 PM

I got them here http://www.appliedracing.com/
The front kit was $687.50 and the back kit is $582.45. The master cylinder was $84.95 and another $100.00 or so to get the steel braided brake lines made up.

68Falcon · 12-24-2005, 12:53 AM

Well I got the Intakes and put on already. This is the intake I'm putting on. I got some machine work done to it. I added a dominator 1" spacer and had it welded on then the inlet opened up.

This is what it looks like after the machine work

This is the intake that was on the motor that I took of. It's a Factory Dual plane intake

12-21-2005, 11:39 PM	#1
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: I just got my Strange front brakes kit in today for my Falcon. I got them here http://www.appliedracing.com/ The front kit was $687.50 and the back kit is $582.45. The master cylinder was $84.95 and another $100.00 or so to get the steel braided brake lines made up. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

12-24-2005, 12:53 AM	#2
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: I just got my Strange front brakes kit in today for my Falcon. Well I got the Intakes and put on already. This is the intake I'm putting on. I got some machine work done to it. I added a dominator 1" spacer and had it welded on then the inlet opened up. This is what it looks like after the machine work This is the intake that was on the motor that I took of. It's a Factory Dual plane intake __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1970 front and rear disc brakes	rayzoro	Classic Mustangs	0	12-08-2003 06:58 PM
Front end wobble with drum brakes	orlowted	Classic Mustangs	9	11-01-2003 06:10 PM
front brakes	Tom S.	Windsor Power	2	10-03-2002 04:48 PM
Line lock question-which line goes to front brakes	Stang_ROTY	Windsor Power	1	05-20-2002 03:53 PM
front disc brakes	v865	Classic Mustangs	2	04-25-1999 06:44 PM