Cam Help For My New 347 Stroker

car9fan · 02-20-2006, 06:12 PM

Thanks for that info, the cam part #31-335-4 COMP CAMS Iam concerned about piston to valve clearance, Here are the pistons that iam useing, 6.5cc/Flat Top
Effective Head Volume: 6.5cc. with my 60 cc Edelbrock RPM HEADS Its going to be 10.5.1 Comp. With that cam do you think i will have any Piston to valve clearance? I would hate to have to buy it put it in cgeck it and send it back, Thanks CAR9FAN

Ieatcamaros · 02-20-2006, 07:52 PM

You are aware that the cam you have listed has the old 302 firing order in it, right? Any comp cam with the prefix #31 has this firing order. Just in case, the old firing order is 1-5-4-2-6-3-7-8. The H.O. firing order is 1-3-7-2-6-5-4-8. Any comp cam with the prefix #35 has this firing order.

Your cam

I don't think you will have trouble with clearance. What size valves? 2.02/1.60?

02-20-2006, 06:12 PM	#1
car9fan CAR9FAN Join Date: Mar 2004 Location: m.d Posts: 103	Re: Cam Help For My New 347 Stroker Thanks for that info, the cam part #31-335-4 COMP CAMS Iam concerned about piston to valve clearance, Here are the pistons that iam useing, 6.5cc/Flat Top Effective Head Volume: 6.5cc. with my 60 cc Edelbrock RPM HEADS Its going to be 10.5.1 Comp. With that cam do you think i will have any Piston to valve clearance? I would hate to have to buy it put it in cgeck it and send it back, Thanks CAR9FAN __________________ MY HOME PAGE

02-20-2006, 07:52 PM	#2
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Re: Cam Help For My New 347 Stroker You are aware that the cam you have listed has the old 302 firing order in it, right? Any comp cam with the prefix #31 has this firing order. Just in case, the old firing order is 1-5-4-2-6-3-7-8. The H.O. firing order is 1-3-7-2-6-5-4-8. Any comp cam with the prefix #35 has this firing order. Your cam I don't think you will have trouble with clearance. What size valves? 2.02/1.60? __________________ The sig says it all.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Building a stroker motor	Mustang_289	Windsor Power	4	02-17-2005 12:46 PM
Blown Stroker Computer Help	RabidPony	Modular Madness	10	02-07-2004 11:56 PM
'super' stroker vs 'budget' stroker	mike5p01	Windsor Power	4	10-11-2003 10:11 PM
Decided to build a stroker, but where do I start?	WhiteLX	Windsor Power	5	12-16-2002 10:35 AM
stroker engine question	82 GT	Windsor Power	1	06-08-2001 03:22 PM