19lb or 24lb Injectors

lx mike · 03-13-2006, 08:16 PM

first of all you won't need new fuel rails if you change injector size. you will need to get your mass air sensor recalibrated for the new injectors. are you still usingthe stock heads?? if so a nice set would make that thing scream with the mods hou have done right now. a 190 fuel pum p will be fine unless your gonna go wild with the engine later on.

88workcar · 03-14-2006, 06:01 AM

You do not need rails to change injecters. You do not need injecters for what you have, although a regulater would be nice. And that is WAY TOO MUCH CAM for stock heads.

03-13-2006, 08:16 PM	#1
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	Re: 19lb or 24lb Injectors first of all you won't need new fuel rails if you change injector size. you will need to get your mass air sensor recalibrated for the new injectors. are you still usingthe stock heads?? if so a nice set would make that thing scream with the mods hou have done right now. a 190 fuel pum p will be fine unless your gonna go wild with the engine later on. __________________ Rice Haters Club Member #101

03-14-2006, 06:01 AM	#2
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: 19lb or 24lb Injectors You do not need rails to change injecters. You do not need injecters for what you have, although a regulater would be nice. And that is WAY TOO MUCH CAM for stock heads. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fuel psi. for 24lb. injectors??	Simi Stang	Windsor Power	5	12-19-2003 03:04 PM
Looking for 19lb 5.0L fuel injectors, anyone got em?	NHxj4x4	Windsor Power	1	01-27-2002 11:16 PM
Pro-M 75mm Mass Air & 24lb injectors worht it?	Seven	Windsor Power	3	06-18-2001 09:38 PM
Do 99+ GT's have 19lb or 24lb injectors?	TM88GT	Modular Madness	5	02-22-2001 10:53 PM
Can I use a FMU setyp 4 24lb with my 30 lb injectors	n20neenee	Windsor Power	0	01-28-2001 05:15 PM