Seeking 4.10 Gear Installation Advice!!!

Hammer · 04-06-2006, 12:37 AM

Two options:
1. Get the 23 tooth gear and get pretty close (That's what I used with my 98 and 3.73s)

or

2. Call Dallas Mustang and ask if they make a speed-cal for your application:
http://www.dallasmustang.com/page/pr...p?product=9910

surfbeast · 04-06-2006, 04:19 PM

Like the HAMMER said. get the Steeda 23 tooth or I think you can get a speed cal. I have the 23 tooth and it's off, but I never look at the speedo anyway!!

04-06-2006, 12:37 AM	#1
Hammer AKA "Dr. Evil" Join Date: Feb 1999 Location: South Fork Ranch Posts: 1,721	Re: Seeking 4.10 Gear Installation Advice!!! Two options: 1. Get the 23 tooth gear and get pretty close (That's what I used with my 98 and 3.73s) or 2. Call Dallas Mustang and ask if they make a speed-cal for your application: http://www.dallasmustang.com/page/pr...p?product=9910 __________________ Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...."

04-06-2006, 04:19 PM	#2
surfbeast Registered Member Join Date: Feb 2002 Location: Maryville,TN Posts: 415	Re: Seeking 4.10 Gear Installation Advice!!! Like the HAMMER said. get the Steeda 23 tooth or I think you can get a speed cal. I have the 23 tooth and it's off, but I never look at the speedo anyway!! __________________ 98 GT / convertable -98 Saleen engine, Saleen appearance pkg. SHM cams,P&P NPI heads, and so much more!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vibration after gear installation	Yan88gt	Windsor Power	10	05-24-2006 11:43 AM
speedometer gear installation?	squid	Windsor Power	2	12-12-2002 12:42 AM
Speedo Gear Question	Harry	Windsor Power	21	08-22-2002 03:28 PM
"Launch" Seeking tips - advice. (long)	Lou Lyman	Classic Mustangs	3	04-12-2001 08:33 AM
4.10 gear	stng87	Windsor Power	1	02-05-2001 07:04 AM