© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-23-2006, 05:20 PM | #1 |
Registered Member
Join Date: Sep 1998
Location: Oviedo, FL
Posts: 992
|
Moving Battery to trunk
I'm ready to install the 347 stroker I've been building and because I used the serpentine belt setup from a 93 5.0 HO Tbird the alternator will not clear the battery.
So the battery will have to go in the trunk. Let me hear the pitfalls and all the horror stories with problems. I've never been real keen on putting a battery in the trunk, because of the length of the positive cable run. But, lots of cars are coming from the factory with them installed there. Besides a hefty positive cable, which I'm running inside along the door sill plate. Running good grounds to the body and from the body to the engine. What else?? I hate to do this, but don't see any other way around it. I'm open for suggestions, etc.
__________________
"Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic |
04-23-2006, 06:03 PM | #2 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
Re: Moving Battery to trunk
Gearhead, it's really pretty easy. First, use a high quality battery box (mine is a plastic Moroso from Summit, $100). It's a vented box with a 1/2" tube to the outside for ventilation. I used a #2 positive cable running through the door sill area from the trunk area to the passenger side of the engine compartment. Since I ran this cable through the interior area, I put it through a heater hose for additional insulation in the interior/doorsill area.
Now for the most important part. Run another #2 cable from the trunk battery neg. ground termial of the battery straight to the engine compartment in the driver side door sill area and along the fire wall straight to the bolt that holds the starter motor. This will assure you of full voltage when cranking. You can't rely on a chassis ground for good cranking performance. Can't think of much more to say. These are the main points that I remember from putting my battery in the trunk several years ago. Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe Last edited by Rev; 04-23-2006 at 08:59 PM.. |
04-24-2006, 04:14 PM | #3 |
Registered Member
Join Date: Sep 1998
Location: Oviedo, FL
Posts: 992
|
Re: Moving Battery to trunk
Thanks for all the imput. I went out today a purchased a Taylor relocation kit. It has an aluminum box and one long positive cable and a short negative.
I plan on doing as Rev said with the long negative too. I can get the cable up the street from my shop at a surplus electrical/electronic store by the foot. I will run two negatives. One to the engine block/starter [long cable] and one to the frame. I like the box because it has a vent too. Not like a boat battery box.
__________________
"Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic |
04-25-2006, 05:28 PM | #4 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
Re: Moving Battery to trunk
The boat battery boxes won't pass tech. inspection at a NHRA drag strip for trunk mounted batteries. Has to be a sealed and ventillated box either metal or heavy plastic and with through bolts anchoring to the frame or floor (no "J" hold down bolts). They also want you to have an external battery cut off switch accessable outside the trunk to turn off all juice in case of an accident. Mine is actually inside the trunk as I couldn't bring myself to cut a big hole in the car to mount the switch. So far they have still let me run anyway, but they do sometimes admonish me.
Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe |
04-26-2006, 12:05 AM | #5 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: Moving Battery to trunk
I had my battery in the trunk and hated it!!!!!
I kept on having starting issues even with a 130 amp alternator and an optima battery. I quickly moved it back to the front.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
04-30-2006, 06:24 PM | #6 | |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
Re: Moving Battery to trunk
Quote:
You really do have to have that long ground cable (#2 guage) that goes from the battery to the starter motor. I did have to learn that the hard way. Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe |
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
moving the battery | soundexcess | Audio, Security, & Electronics | 0 | 07-09-2005 08:58 PM |
Battery in trunk??? | diablo_delsol | Special Production | 1 | 02-05-2005 01:34 AM |
When moving solenoid to the trunk with battery... Help Please | Rick 91GT | Windsor Power | 2 | 04-18-2001 07:51 AM |
battery in the trunk | stroker393 | Windsor Power | 0 | 03-09-2001 07:23 PM |
Battery in the Trunk | rtz | Windsor Power | 20 | 03-09-2001 11:14 AM |