fuel pressure and bad injectors???

[FoxBuilder]

Is the mass air meter calibrated for the 30lb. injectors?

I have always known injector's to either work or don't work. However they can become clogged.

First, I would check the plug's to see if any cylinders are running a rich/lean condition. Second, I'd ohm all the injectors. Across the two pins should read 12-16 ohms. If everything checks out try tunning the motor again. Go to my web page, under Engine Management Systems, check out the tech tips.



------------------
For the performance fanatic
Visit my web page at:
www.geocities.com/getradicalmotors/