T_M's Official 351 Fuelie Project Thread

[The_Methodist]

Ok here are pics of the donor car I picked up a few days ago.






go go porno red interior


Some Engine Build Stuff:

I have decided on this basic Engine build:

Victor EFI Intake
Victor CNC heads with a 2.10 Int, 1.60 exh.
Ford Competition Windsor Block (formerly called the SVO Block, new from ford) with the 9.200" deck, 4 bolt mains and a 7.749 main journal diameter.
Eagle Specialties Competition 418 Windsor Stroker kit
46# injectors
Pro-M 80mm Mass Air unit calibrated to said injectors
75mm Throttle Body
1.6 roller rockers
CompCams Roller 35-462-8, .576 lift with 244 duration @50
Running ~10.7:1

And some other stuff

On paper that puts me at 556hp at 6000rpm and 546ft/lbs torque at 4500rpm. Right in my target pocket as far as power goes. That puts me at an estimated 10.87 ET (when only factoring power and weight) with the car weighing 3100lbs (by the time I'm done with it).

This is going to be one sick ride.