valves

bmxmon · 10-04-2006, 12:49 AM

torque specs on the valves? They are held in by the valve springs(stem locks and what not), so im not sure what your talking about... Im guessing you talking about the rockers? Im not sure how yours exactly work,(some, like mine, have stops that you just tighten it to, others you have to adjust) as i havent delt with 289 hi-po heads before, though many on here have and im sure they will be able to help you out, assuming thats what your looking for...

jhun66stang · 10-04-2006, 03:28 PM

yeah i was talking about the rockers... but i don't know if it matters that i have crane roller rockers and not the stock rockers. Because one of my valves is clicking and i took the cover off and some of the rockers and slightly loose and i don't know how much i'm supposed to tighten them down.

10-04-2006, 12:49 AM	#1
bmxmon Registered Member Join Date: Mar 2004 Location: Minnesota Posts: 950	Re: valves torque specs on the valves? They are held in by the valve springs(stem locks and what not), so im not sure what your talking about... Im guessing you talking about the rockers? Im not sure how yours exactly work,(some, like mine, have stops that you just tighten it to, others you have to adjust) as i havent delt with 289 hi-po heads before, though many on here have and im sure they will be able to help you out, assuming thats what your looking for... __________________ Alex

10-04-2006, 03:28 PM	#2
jhun66stang Registered Member Join Date: Oct 2006 Posts: 4	Re: valves yeah i was talking about the rockers... but i don't know if it matters that i have crane roller rockers and not the stock rockers. Because one of my valves is clicking and i took the cover off and some of the rockers and slightly loose and i don't know how much i'm supposed to tighten them down.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who carries ferrera valves? Is a stratched valveface salvagable?	crazypete	Windsor Power	3	07-30-2004 08:26 PM
Valves is this my problem?	Big Bopper	Windsor Power	4	11-23-2003 01:05 AM
setting non-adjustable valves	82 GT	Windsor Power	5	08-28-2003 08:50 AM
adjusting valves/ stud mount?? PKRWUD? Anyone??	Simi Stang	Windsor Power	8	07-08-2003 11:43 AM
Pistons for Larger Valves?	MustangChile	Classic Mustangs	4	02-28-2003 01:27 AM