Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-04-2006, 08:07 PM
|
#4 |
|
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: Z303 Cam and Z heads
I ran the E303 cam for a while and it made good power but idled like crap for the most part.
E303 Dyno The custom cam I have now has .566 lift and idles great. I havent dyno'd with it yet but it does make more power cause I trap 2 mph more than with the E cam. If it were me I would go with the big Z cam or a custom cam the E cam is a pain in the @ss with all the idle and vacuum issues it has. Just make sure you get an intake manifold that matches the powerband of the cam you choose and you will be all good.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|