Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
11-14-2006, 11:40 PM
|
#1 |
|
Registered Member
Join Date: Aug 2006
Location: Hot-Lanta
Posts: 48
|
Re: aluminum heads
Brian
I know that I put it up there so those reading this thread could compare the one you have to the ones that I listed. "Want more top end with your heads put that 252-260 Lunati Hyd Roller in it - Have it ground on 108 LSA.  " ( Put it in at 100 ICL ) Dan Static C/R is the ratio of the cylinder volume at TDC verses the volume at BDC Example: 351 CID /8=43.875 cu. in. times 16.38716= 718.986645 cc's At BDC TDC= Chamber vol, + Gasket vol, + valve reliefs, + deck clearance, + distance to top ring. If you have a dome piston then you have to subtract that vol from the above. Chamber= 66.5 Gasket= 9.3 - 4.100X.043 Piston= 7.0 - No dome 2 eyebrows Deck = 0.0 Tot = 82.8 cc + 719 = 801.8/82.8= 9.68 to 1 Engine tech is all about the math learn the math and you can learn the engine dynamics!!! Denny@JDS Induction Products
__________________
JDS Induction Products Still The Fastest Ford Heads On The Planet |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Generic Aluminum heads | rwhite65 | Windsor Power | 4 | 06-08-2005 07:24 AM |
| ported e7's? | bailey_57 | Windsor Power | 28 | 07-15-2004 07:54 PM |
| aluminum heads | wht04gt | Modular Madness | 2 | 01-29-2004 01:57 PM |
| Edel. non-smog to AFR smog legal heads? What do you guys think? | Simi Stang | Windsor Power | 10 | 06-19-2003 11:14 PM |
| Urgent Help!!!!Just installed aluminum heads on backwards...Will it work OK??? | tb | Windsor Power | 5 | 12-31-2001 12:53 AM |