cam?

Coupe50h · 01-08-2007, 03:53 PM

I never knew rockers had "dowels".?

hydroc, I heard of people using 1.7's with that cam, and stock pistons, but i would do some more research.

hrdroc · 01-08-2007, 04:15 PM

Yeah I know I called Trick Flow and they was telling me that they know 1.6's would work and will give you that lift of the cam. But 1.7's will take up the lift .030 on the intake and the exhaust being intake .499 to .529 and exhaust being .510 to .540... So they told me that I had to check the clearance and myself and go from there. But I was hoping that someone would know and would be able to tell me for sure if they will work....

USMC302 · 01-08-2007, 04:17 PM

Rockers

LOL, ok, ok, the Needle bearing fulcrum. Just thought I would lose some people here. Here's a pic as well.

hrdroc · 01-08-2007, 04:29 PM

with thi set what type of after market intake would work good with this....any suggestions

01-08-2007, 03:53 PM	#1
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Re: cam? I never knew rockers had "dowels".? hydroc, I heard of people using 1.7's with that cam, and stock pistons, but i would do some more research. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

01-08-2007, 04:15 PM	#2
hrdroc Registered Member Join Date: Jan 2007 Posts: 12	Re: cam? Yeah I know I called Trick Flow and they was telling me that they know 1.6's would work and will give you that lift of the cam. But 1.7's will take up the lift .030 on the intake and the exhaust being intake .499 to .529 and exhaust being .510 to .540... So they told me that I had to check the clearance and myself and go from there. But I was hoping that someone would know and would be able to tell me for sure if they will work.... __________________ hrdroc-.600 lift springs GT40P heads ported all the way out,1.6 ratio roller rockers,24lb injectors,70mm throttle body,under pulley's,cobra intake port match to the head,trick flow stage 1 cam .499/.510 lift,cold air intake,73mm mass air meter,adj fuel pressure regulator. stock bottom end et street slicks- 13.50@104.99 best 60ft. 1.720 3.73 gears reg street tires- 14.89@101.25 best 60ft. 2.090 3.08 gears

01-08-2007, 04:17 PM	#3
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: cam? Rockers LOL, ok, ok, the Needle bearing fulcrum. Just thought I would lose some people here. Here's a pic as well. __________________

01-08-2007, 04:29 PM	#4
hrdroc Registered Member Join Date: Jan 2007 Posts: 12	Re: cam? with thi set what type of after market intake would work good with this....any suggestions __________________ hrdroc-.600 lift springs GT40P heads ported all the way out,1.6 ratio roller rockers,24lb injectors,70mm throttle body,under pulley's,cobra intake port match to the head,trick flow stage 1 cam .499/.510 lift,cold air intake,73mm mass air meter,adj fuel pressure regulator. stock bottom end et street slicks- 13.50@104.99 best 60ft. 1.720 3.73 gears reg street tires- 14.89@101.25 best 60ft. 2.090 3.08 gears

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread: