Broke my clutch cable, which one should I get?

Dark_5.0 · 02-12-2007, 11:01 PM

Yeah always go with a Ford cable. Get a good quadrant but trhe adjuster probably isnt necessary.

When do you get a new timeslip?

skiwesser · 02-12-2007, 11:50 PM

Hopefully in a couple of weeks, depending on how much trouble this cable quadrant deal is, I hear a lot of talk about the cable being short, is this a reason to go with ford?
MM say's theirs is as good as ford and they agree ford is best, so I could get both from them. I'll bet you pay uot the butt at a dealership.

P.S. This bastard better go 8.30's at least (1/8)

I can't wait to get the nitrous tune. I plan to tap the gas activation through my unused foglight switch so I can slap it on when I hit 2nd as I am afraid to hit it in 1st (I have a window switch and a WOT switch but this way I can find it quick and not have to fumble around for the main switch while going down the track(enough goin on there already right?

) I am afraid gas in 1st will grenade theT-5.
I need some shorter tires,these McReary's are too tall!! 27.5"

skiwesser · 02-13-2007, 08:02 AM

If I can get the cable local, I could change the quadrant later right, It is what is hard to change out right, getting out the locking pawl and plastic quadrant. Is it much easier to just change the cable only? I want it going today!!

Hozer 88GTConv · 02-13-2007, 08:10 AM

I changed one two weeks ago in the lot of a gas station. Took 20 minutes.
You've gotta do the limbo with your front seat in, I had the wife hold the cable to keep tension on it once I had hooked it onto the pawl. I have those 10 inch skinny medical locking plier things and they make it easy.
Good luck.

I've snapped 3 in 8 years...Ford and BBK kits...

Hozer 88GTConv · 02-13-2007, 08:14 AM

These are great!

skiwesser · 02-13-2007, 07:38 PM

Well, the local ford dealer wanted $160 for the cable and didn't have it in stock, ofcourse I couldn't get the BBK from Summit today, so I am rolling with a $23 cable from advance auto, but I'm driving it and I got it out of the weather just in time. It was easy enough to change the cable maybe 1/2 hr., but I sure am not looking forward to swapping out that quadrant!!
I'll let you guys know how long this $23 job lasts.

Dark_5.0 · 02-14-2007, 01:23 AM

The quadrant is easy. Remove the drivers seat before you get started and it is easy money.

Trust me.

02-12-2007, 11:01 PM	#1
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Broke my clutch cable, which one should I get? Yeah always go with a Ford cable. Get a good quadrant but trhe adjuster probably isnt necessary. When do you get a new timeslip? __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

02-12-2007, 11:50 PM	#2
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Re: Broke my clutch cable, which one should I get? Hopefully in a couple of weeks, depending on how much trouble this cable quadrant deal is, I hear a lot of talk about the cable being short, is this a reason to go with ford? MM say's theirs is as good as ford and they agree ford is best, so I could get both from them. I'll bet you pay uot the butt at a dealership. P.S. This bastard better go 8.30's at least (1/8) I can't wait to get the nitrous tune. I plan to tap the gas activation through my unused foglight switch so I can slap it on when I hit 2nd as I am afraid to hit it in 1st (I have a window switch and a WOT switch but this way I can find it quick and not have to fumble around for the main switch while going down the track(enough goin on there already right?) I am afraid gas in 1st will grenade theT-5. I need some shorter tires,these McReary's are too tall!! 27.5" __________________ 88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306. DYNO TUNED TO 300.97 RWHP 337RWTQ

02-13-2007, 08:02 AM	#3
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Re: Broke my clutch cable, which one should I get? If I can get the cable local, I could change the quadrant later right, It is what is hard to change out right, getting out the locking pawl and plastic quadrant. Is it much easier to just change the cable only? I want it going today!! __________________ 88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306. DYNO TUNED TO 300.97 RWHP 337RWTQ

02-13-2007, 08:10 AM	#4
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	Re: Broke my clutch cable, which one should I get? I changed one two weeks ago in the lot of a gas station. Took 20 minutes. You've gotta do the limbo with your front seat in, I had the wife hold the cable to keep tension on it once I had hooked it onto the pawl. I have those 10 inch skinny medical locking plier things and they make it easy. Good luck. I've snapped 3 in 8 years...Ford and BBK kits... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

02-13-2007, 08:14 AM	#5
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	Re: Broke my clutch cable, which one should I get? These are great! __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

02-13-2007, 07:38 PM	#6
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Re: Broke my clutch cable, which one should I get? Well, the local ford dealer wanted $160 for the cable and didn't have it in stock, ofcourse I couldn't get the BBK from Summit today, so I am rolling with a $23 cable from advance auto, but I'm driving it and I got it out of the weather just in time. It was easy enough to change the cable maybe 1/2 hr., but I sure am not looking forward to swapping out that quadrant!! I'll let you guys know how long this $23 job lasts. __________________ 88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306. DYNO TUNED TO 300.97 RWHP 337RWTQ

02-14-2007, 01:23 AM	#7
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Broke my clutch cable, which one should I get? The quadrant is easy. Remove the drivers seat before you get started and it is easy money. Trust me. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clutch cable	toddgambino	Windsor Power	1	04-23-2006 10:40 AM
Clutch cable Help!	NitroNixon	Windsor Power	4	06-27-2003 01:58 PM
clutch cable	greydan	Windsor Power	6	12-02-2001 06:11 AM
Clutch cable broke? Now quadrant? PLEASE HELP!	93CobraR	Windsor Power	5	11-19-2001 11:11 AM
clutch cable	elma22	Windsor Power	3	09-08-2001 12:44 PM