Opps I did it again

88workcar · 02-28-2007, 06:23 AM

As I stated in an earlyer post, I had to finish the nieghbors motor before my own. I did. Check this out,
Bored .030 stock block, forged pistons
E7s ported, 3 angle valve job, good springs
ported cobra intake, 65 tb
F cam, 1.6 motorsport RR
Long tubes, off road pipe, mac mufflers
3.73s
underdrives, short belt, alt, steer, water.
stock injectors, stock computer

Pretty normal stuff? stock computer, yea, a SPEED DENSITY
stock computer. Not being sarcastic, for real, I never understood why every one said it can't be done. We will track test real soon. It has a good POP to it at idle, and revs real quick. Fully loaded car elec everything, no suspention.

tmoss · 02-28-2007, 08:40 AM

let us know how it runs - "no suspension" is all I see that will hold it down some.............

88workcar · 02-28-2007, 07:53 PM

Thats the next thing, Drag spring pkg and 90/10s

goodyear1984 · 03-11-2007, 12:58 PM

its not that it cant be done its alot better to have mass air when ur moding it.

02-28-2007, 06:23 AM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Opps I did it again As I stated in an earlyer post, I had to finish the nieghbors motor before my own. I did. Check this out, Bored .030 stock block, forged pistons E7s ported, 3 angle valve job, good springs ported cobra intake, 65 tb F cam, 1.6 motorsport RR Long tubes, off road pipe, mac mufflers 3.73s underdrives, short belt, alt, steer, water. stock injectors, stock computer Pretty normal stuff? stock computer, yea, a SPEED DENSITY stock computer. Not being sarcastic, for real, I never understood why every one said it can't be done. We will track test real soon. It has a good POP to it at idle, and revs real quick. Fully loaded car elec everything, no suspention. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

02-28-2007, 08:40 AM	#2
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 634	Re: Opps I did it again let us know how it runs - "no suspension" is all I see that will hold it down some............. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

02-28-2007, 07:53 PM	#3
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Opps I did it again Thats the next thing, Drag spring pkg and 90/10s __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

03-11-2007, 12:58 PM	#4
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Opps I did it again its not that it cant be done its alot better to have mass air when ur moding it. __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: