coil overs?

USMC302 · 03-20-2007, 04:42 PM

Quote:

Originally Posted by Jeff Chambers

Check with the manufacturer of the kit. Most kits will accept the factory struts with modification, namely removing the cartridge bump plate.

I just took a hammer to the plates, the welds broke and they were out of the way. Presto! lol

Dark_5.0 · 03-20-2007, 04:53 PM

I stand corrected. where there is a hammer there is a way.

mipedley · 03-20-2007, 07:14 PM

ok i am not 100% on what you broke off the strut? does anyone have a picture of this? or of there setup
i really would like to use my stock struts if i can

thanks mike

USMC302 · 03-21-2007, 09:39 AM

I'll try to dig something up but if you try to put the coil over on the strut, it will be really obvious all of the sudden.

USMC302 · 03-21-2007, 10:40 AM

lak-40511_w.jpg

This is the dust cover that needs removing, keep in mind, once you remove that, you will have some excess dirt collection around there...Good luck!

03-20-2007, 04:53 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: coil overs? I stand corrected. where there is a hammer there is a way. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

03-20-2007, 07:14 PM	#3
mipedley Registered Member Join Date: Nov 2006 Posts: 19	Re: coil overs? ok i am not 100% on what you broke off the strut? does anyone have a picture of this? or of there setup i really would like to use my stock struts if i can thanks mike

03-21-2007, 09:39 AM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: coil overs? I'll try to dig something up but if you try to put the coil over on the strut, it will be really obvious all of the sudden. __________________

03-21-2007, 10:40 AM	#5
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: coil overs? lak-40511_w.jpg This is the dust cover that needs removing, keep in mind, once you remove that, you will have some excess dirt collection around there...Good luck! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
coil overs..	scale	Corner Carvers Delight	2	09-23-2005 03:32 PM
Help adjusting coil overs	ciara	Windsor Power	3	01-26-2004 03:31 AM
coil overs	faststang90	Windsor Power	0	04-20-2002 12:59 PM
rear coil overs	faststang90	Windsor Power	0	03-04-2002 12:47 AM
COIL OVERS	whsjr50	Corner Carvers Delight	1	05-06-2001 08:18 PM