 
                    
                  
                    © Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
                    
                  
                MustangWorks.com is designed and hosted by Aero3 Media.
|  04-29-2007, 01:01 PM | #1 | 
| Registered Member Join Date: Feb 2002 Location: Jacksonville, FL 
					Posts: 706
				 |  Major Fuel Injector Prob, intake full! Gents, Something is very bad in my motor. My fuel injectors have managed to fill up the intake with fuel. I put the key in the ignition, haven't even tried to turn the car over for 6 weeks. No cranking at all and it filled up at least 3 cylinders. I heard a "tick tick" from the injectors and thought that was weird. Well, this is bad. What the hell happened? History: Car was running fine, then stopped one day idling in driveway. That's it. Will not hold fuel pressure (cause it's dumping into the cylinders)... Update: Constant 12v to each injector with the ignition on, no pulsing, just constant... 
				__________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy Last edited by Hozer 88GTConv; 04-29-2007 at 01:42 PM.. | 
|   |   | 
|  04-29-2007, 08:59 PM | #2 | 
| Registered Member Join Date: Feb 2002 Location: Jacksonville, FL 
					Posts: 706
				 |  Re: Major Fuel Injector Prob, intake full! Swapped computers and voila!  I pulled the plugs and shot the fuel out. It started up, but I only ran it for a minute b/c I feared fuel contamination. Sure enough, the oil had a quart of fuel in it easy. I was worried I would spin a bearing, but it seems to be okay after a fresh oil change. No valve ticking at all. I just have a bad intake backfire, I didn't rtv the intake gasket b/c I was in a rush. So, that should be it... I'll let you know.  
				__________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy | 
|   |   | 
|  05-02-2007, 11:34 AM | #3 | 
| Registered Member Join Date: Feb 2002 Location: Jacksonville, FL 
					Posts: 706
				 |  Re: Major Fuel Injector Prob, intake full! Three day update: a.Properly sealed the upr/lwr intake b.Hooked the Anderson PMS back up, what a great piece of eqpt. The stang has been running fine for two days commuting, steady idle, good accel, 02's are reading normally although my wideband is on my h-pipe and it's showing a leaner condition than the 02's farther upstream. I'm wondering if the lack of backpressure is adversely affecting the wideband reading. I had it installed by a great Mustang performance shop guy, so I want to doubt that theory. Btw, I think the Amderson PMS is a great piece of gear, despite the price. 
				__________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy | 
|   |   | 
|  05-07-2007, 11:21 AM | #4 | 
| Registered Member Join Date: Mar 2004 Location: Minnesota 
					Posts: 950
				 |  Re: Major Fuel Injector Prob, intake full! Wow, thats crazy. 
				__________________ Alex | 
|   |   | 
|  05-07-2007, 12:13 PM | #5 | 
| Registered Member Join Date: Feb 2002 Location: Jacksonville, FL 
					Posts: 706
				 |  Re: Major Fuel Injector Prob, intake full! Yeah, I only have 10k on the new motor and was sweating that I jacked up the bearings. I still will perform a compression test on each cylinder, but what is done is done. It seems to be okay, just needs a little tuning on the low end and she'll be okay. This is what happens when you don't fire the stang up for 7 weeks. They get angry, very very angry. 
				__________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy | 
|   |   | 
|  05-22-2007, 04:23 PM | #6 | 
| Registered Member Join Date: Apr 2001 Location: Gallatin, Tn 
					Posts: 1,326
				 |  Re: Major Fuel Injector Prob, intake full! You said you swapped computers, wonder if the old one was just feeding a constant pulse to those couple injectors, never seen anything like that, ever! I guess the injector could be leaking but that would only be under the fuel system being pressurized......hmmm, WILD pic! 
				__________________   | 
|   |   | 
|  05-22-2007, 05:38 PM | #7 | 
| Registered Member Join Date: Feb 2002 Location: Jacksonville, FL 
					Posts: 706
				 |  Re: Major Fuel Injector Prob, intake full! good thing I didn't have a cigar, which is typically what I do while working on the car... several weeks now and she's running great.... 
				__________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy | 
|   |   | 
|  | 
| Thread Tools | |
| Display Modes | Rate This Thread | 
| 
 | 
 | 
|  Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| 1993 Mustang Lx 2.3l Fuel Pump Prob | hammer2813 | Small Ponies | 7 | 04-19-2007 02:12 PM | 
| How Accurate Is The Fuel Injector/Fuel Pressure Calculator? | BowTie Eater 5 Liter | Windsor Power | 11 | 03-18-2006 03:41 PM | 
| Heads/Intake swap finished! Small prob though... | NotchJohnson | Windsor Power | 9 | 12-21-2002 11:54 AM | 
| Major Electrical Prob! | GreenPony | Windsor Power | 2 | 02-21-2002 08:55 AM | 
| new intake install, MAJOR PROBLUMS!!!!(long) | DemonGT | Windsor Power | 8 | 06-14-2001 12:16 PM | 
 
                    
                  