first dyno session

[goodyear1984]

it seems to be on the light side.i would have more timing than 26 unless u have a power adder

[goodyear1984]

the only thing else that is hurting is the 185 heads with a 331 would make more power in the upper end and less in the lower i would have went with a bigger cam making power to 6000-6500

[Unit 5302]

Originally Posted by goodyear1984

the only thing else that is hurting is the 185 heads with a 331 would make more power in the upper end and less in the lower i would have went with a bigger cam making power to 6000-6500

The GT-40 Intake will be the first restriction to higher rpm performance. It looks like a good, healthy combination to me.

[Markus]

Originally Posted by Unit 5302

The GT-40 Intake will be the first restriction to higher rpm performance. It looks like a good, healthy combination to me.

I think exactly the same. The GT40 is the bottle neck in this combination. A bigger cam would not make much more power but more timing would. I increased the total timing @ wot to 32 degree and i feel more power.
Like i said, this was the first dyno session without playing around with ignition and fuel delivery.
But i was surprised with the relatively high torque.

thank you guys

Markus

[goodyear1984]

naww if u were looking to have a low to mid power like u have u should have went with the 165 heads.yea the intake would be restrictive but it will run to 5500 all day.u would have made better low end numbers with the smaller head i mean come on do the math 4700 rpm with a head that runs past 7000 on a 347.

[goodyear1984]

ps ur car looks sick,love the blue

[tmoss]

A guy I know has a 325 stroker (yes it's a 325) with AFR 185 heads and a GT40 intake that has a fully ported lower, he dyno tested at 305HP/351TQ through an AOD and just ran a 11.85@116 in a Fox body. I bet you're going to be happy with it.