Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
07-24-2009, 06:42 PM
|
#1 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: Need Help Badly
go to a part store and get some maf cleaner and try to clean the maf.u can use brake cleaner but it takes the wax of if u dont do it right.if that fixes it make sure to get a new airfiter or if its a k&n make sure u clean it right
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's  1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
11-02-2009, 09:39 PM
|
#2 |
|
Registered Member
Join Date: Oct 2009
Posts: 4
|
Re: Need Help Badly
Your IAC could be bad. Idle Air Control valve on the side of the throttle body...
|
|
|
|
|
11-04-2009, 12:23 AM
|
#3 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: Need Help Badly
cannot be a iac that only control idle
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
11-04-2009, 12:24 AM
|
#4 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: Need Help Badly
what did u set the tps to?whats it at at wot
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
11-04-2009, 08:32 PM
|
#5 |
|
Registered Member
Join Date: Oct 2009
Posts: 4
|
Re: Need Help Badly
It measure's out the idle speed by how much air is flowing(fuel and air). If its stalling out on ya that could be it, but of course I know nothing...Your MAF sensor could be the culpret as well seein how its just up stream from your IAC...
|
|
|
|
|
11-14-2009, 11:01 PM
|
#6 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: Need Help Badly
if u listen to what he said you would know thats not an iac problem..also the iac does not measure anything it gets a signal to allow more or less air at idle to get the desired idle speed.
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
11-14-2009, 11:03 PM
|
#7 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: Need Help Badly
ps the iac motor will never cause a bog concern like he stated,you should read every thing befor u send some one looking in the wrong direction
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Not really Electronics, but help needed badly | mcfuddlenuts | Audio, Security, & Electronics | 0 | 08-17-2007 10:14 PM |
| need carb help badly | HP400RW | Classic Mustangs | 10 | 04-14-2003 02:10 AM |
| Advice needed badly...... | MattwantsSpeed | Windsor Power | 2 | 07-16-2002 01:26 AM |
| I need you guys now badly on this one !! | jetuomi | Windsor Power | 1 | 03-27-2002 12:49 AM |
| Need help badly!! | 95GTS | Windsor Power | 6 | 02-02-2001 04:57 PM |