Lentech AOD???

LfiveohX · 10-07-2001, 09:26 PM

I love mine. Call lentech and ask the techline what they recommend. They told me for the daily driver mustang to go with the non-lock up converter because the locking converter is noisy and klunks when shifting into overdrive. I got the Street Terminator Plus which has the 10" converter and hardened shaft. They said it will have no problems with up to 600hp. The valve body also eliminates the AOD Shuffle. You need to wire a on/off switch for the Overdrive and L is now 1st, Drive is now 2nd, and Overdrive is 3rd and 1-3 with Overdrive depending if the switch is on or off. Pretty sweet.

------------------
1993 Conv. LX 5.0, FRPP 302 longblock w/Y303 aluminum heads, E303 cam. 93 cobra intake, 65mm TB, 73mm MAF, 24lb injectors, 255lph fuel pump, Aeromotive AFPR, Underdrive pullies, Motorsport ceramic coated shorty headers, Bassani X-pipe w/converters, American Thunder Cat-back, Lentech AOD, Alum. driveshaft, 3.73's. Best E.T. 13.98 @ 99.78mph w/ 2.171 60' (Fontana Dragway 10/06/01)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
trouble installing lentech valvebody	x4cylnotch	Windsor Power	0	03-30-2003 02:19 PM
Made the decision....Going with the Lentech!!	Stang_ROTY	Windsor Power	23	06-16-2002 10:53 AM
Tranny update...Lentech VB	silver_pilate	Blue Oval Lounge	10	05-02-2002 12:34 PM
LenTech, Won't stay out of overdrive	bob_nj	Blue Oval Lounge	2	03-05-2001 08:43 PM
GER vs Lentech	Shotgun28	Windsor Power	8	01-17-2001 03:28 AM

10-07-2001, 09:26 PM	#1
LfiveohX Addicted to the 5.0 Join Date: Jun 2001 Location: Oxnard, CA. USA Posts: 117	I love mine. Call lentech and ask the techline what they recommend. They told me for the daily driver mustang to go with the non-lock up converter because the locking converter is noisy and klunks when shifting into overdrive. I got the Street Terminator Plus which has the 10" converter and hardened shaft. They said it will have no problems with up to 600hp. The valve body also eliminates the AOD Shuffle. You need to wire a on/off switch for the Overdrive and L is now 1st, Drive is now 2nd, and Overdrive is 3rd and 1-3 with Overdrive depending if the switch is on or off. Pretty sweet. ------------------ 1993 Conv. LX 5.0, FRPP 302 longblock w/Y303 aluminum heads, E303 cam. 93 cobra intake, 65mm TB, 73mm MAF, 24lb injectors, 255lph fuel pump, Aeromotive AFPR, Underdrive pullies, Motorsport ceramic coated shorty headers, Bassani X-pipe w/converters, American Thunder Cat-back, Lentech AOD, Alum. driveshaft, 3.73's. Best E.T. 13.98 @ 99.78mph w/ 2.171 60' (Fontana Dragway 10/06/01)