Replacement wires etc.

MidNiteBlu 5.0 · 10-19-2001, 09:25 PM

Hey everyone I am thinking of gettin new spark plug wires and a cap and rotor pretty soon and was wondering what would be good. I was thinking of Ford Racing 9mm wires and an MSD cap and rotor kit. Does this sound good thanx

Later

------------------
'89 LX Hatchback 5spd, Flowmasters, K+N, B+M Ripper shifter, Ford Racing 10.5" Clutch, Kick a** stereo coming soon!

SYSTEM OF A DOWN rules!!

84LX89GT · 10-19-2001, 11:48 PM

I don't think you should have any problems, it sounds like that would provide a low resistance ignition setup and they should all fit together without any problems.

Mr 5 0 · 10-20-2001, 01:31 PM

Sounds fine.

I use Taylor Spiro-Pro plug wires but also used the Ford 9mm wires for years with no problem. I just find that the Taylor's snap on and off easier (no ripped ends) and the 8mm size fits my wire holders better.

I use an Eichlin brass-terminal cap & rotor but the MSD kit is good, too.

RED92LX50 · 10-20-2001, 08:47 PM

If you are getting wires & cap & rotor, you may want to look at getting the Tune-up kit from Downs Ford (or similar). I got 9mm wires, cap, rotor, plugs, PCV, and Fuel Filter for $79 + $10 shipping. Some places sell the 9mm wires for $50 by themselves.

MidNiteBlu 5.0 · 10-22-2001, 09:58 PM

Thanks for all your help. I will get the wires and probably buy a fuel filter from a ford dealer in my area because i can get 20% off from them through the mustang club. I kinda want the MSD cap and rotor because it is red... I guess im weird like that o well
thanks guys

Nick

------------------
'89 LX Hatchback 5spd, Flowmasters, K+N, B+M Ripper shifter, Ford Racing 10.5" Clutch, Kick a** stereo coming soon!

SYSTEM OF A DOWN rules!!

10-19-2001, 09:25 PM	#1
MidNiteBlu 5.0 I got something to say Join Date: Sep 2001 Location: San Diego, CA Posts: 1,557	Replacement wires etc. Hey everyone I am thinking of gettin new spark plug wires and a cap and rotor pretty soon and was wondering what would be good. I was thinking of Ford Racing 9mm wires and an MSD cap and rotor kit. Does this sound good thanx Later ------------------ '89 LX Hatchback 5spd, Flowmasters, K+N, B+M Ripper shifter, Ford Racing 10.5" Clutch, Kick a** stereo coming soon! SYSTEM OF A DOWN rules!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spark plug Wires question	88fivepointoh	Windsor Power	5	06-07-2003 10:37 PM
Good deal on plug wires	surfbeast	Modular Madness	3	03-08-2003 05:03 PM
Ford Racing Spark Plug Wires	dragstang86	Windsor Power	5	02-11-2003 01:41 PM
FRPP wires solid or spiral core???	TEXSN95	Windsor Power	1	04-23-2001 10:23 AM
What would cause spark wires to arc? (besides bad wires)	bgilly	Windsor Power	4	03-27-2001 11:20 AM

10-19-2001, 11:48 PM	#2
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	I don't think you should have any problems, it sounds like that would provide a low resistance ignition setup and they should all fit together without any problems.

10-20-2001, 01:31 PM	#3
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Sounds fine. I use Taylor Spiro-Pro plug wires but also used the Ford 9mm wires for years with no problem. I just find that the Taylor's snap on and off easier (no ripped ends) and the 8mm size fits my wire holders better. I use an Eichlin brass-terminal cap & rotor but the MSD kit is good, too.

10-20-2001, 08:47 PM	#4
RED92LX50 Registered Member Join Date: Aug 1999 Location: Fairfax, VA Posts: 220	If you are getting wires & cap & rotor, you may want to look at getting the Tune-up kit from Downs Ford (or similar). I got 9mm wires, cap, rotor, plugs, PCV, and Fuel Filter for $79 + $10 shipping. Some places sell the 9mm wires for $50 by themselves.

10-22-2001, 09:58 PM	#5
MidNiteBlu 5.0 I got something to say Join Date: Sep 2001 Location: San Diego, CA Posts: 1,557	Thanks for all your help. I will get the wires and probably buy a fuel filter from a ford dealer in my area because i can get 20% off from them through the mustang club. I kinda want the MSD cap and rotor because it is red... I guess im weird like that o well thanks guys Nick ------------------ '89 LX Hatchback 5spd, Flowmasters, K+N, B+M Ripper shifter, Ford Racing 10.5" Clutch, Kick a** stereo coming soon! SYSTEM OF A DOWN rules!!