Lentech AOD

Jeff Chambers · 10-24-2001, 06:50 AM

You'll have to talk to Len, but I ordered mine this time last year and they were running an 'End of Season' special that knocked a couple hundred off. Go ahead and talk with Len about my combination and he'll tell you what we've done over the last year.

Talk with Len about your plans for the car and he'll help you decide which transmission and converter combo makes sense. If you're planning on a combination street/strip car, then I'd think he'll steer you towards the Street Terminator Plus. If its going to be 95% street driven, then the Street Terminator would suffice. If you've got plans for 400+HP and a lot of strip duty, then you probably should seriously consider moving up to the Strip Terminator line. Len won't steer you wrong just for the sake of the $$$. Listen and trust what he tells you.

I just drove up to their shop the weekend before last and let me say that I was thoroughly impressed. This is no slouch operation. Clean, orderly and professional. EVERY valve body gets thoroughly tested on a valve body machine before it is shipped or installed. EVERY complete transmission gets thoroughly tested on a transmission dyno with all critical functions evaluated. There are NO shortcuts in their processes. Chris attempted to explain how a Lentech valve body works, but the details quickly went over my head, but I could see that Len has seriously modified and improved the design of the valve body.

------------------
Jeff Chambers
Trophy Stock #3
11.462 Seconds / 117.43 MPH
Chambers Racing Team

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
trouble installing lentech valvebody	x4cylnotch	Windsor Power	0	03-30-2003 02:19 PM
Made the decision....Going with the Lentech!!	Stang_ROTY	Windsor Power	23	06-16-2002 10:53 AM
Tranny update...Lentech VB	silver_pilate	Blue Oval Lounge	10	05-02-2002 12:34 PM
LenTech, Won't stay out of overdrive	bob_nj	Blue Oval Lounge	2	03-05-2001 08:43 PM
GER vs Lentech	Shotgun28	Windsor Power	8	01-17-2001 03:28 AM

10-24-2001, 06:50 AM	#1
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	You'll have to talk to Len, but I ordered mine this time last year and they were running an 'End of Season' special that knocked a couple hundred off. Go ahead and talk with Len about my combination and he'll tell you what we've done over the last year. Talk with Len about your plans for the car and he'll help you decide which transmission and converter combo makes sense. If you're planning on a combination street/strip car, then I'd think he'll steer you towards the Street Terminator Plus. If its going to be 95% street driven, then the Street Terminator would suffice. If you've got plans for 400+HP and a lot of strip duty, then you probably should seriously consider moving up to the Strip Terminator line. Len won't steer you wrong just for the sake of the $$$. Listen and trust what he tells you. I just drove up to their shop the weekend before last and let me say that I was thoroughly impressed. This is no slouch operation. Clean, orderly and professional. EVERY valve body gets thoroughly tested on a valve body machine before it is shipped or installed. EVERY complete transmission gets thoroughly tested on a transmission dyno with all critical functions evaluated. There are NO shortcuts in their processes. Chris attempted to explain how a Lentech valve body works, but the details quickly went over my head, but I could see that Len has seriously modified and improved the design of the valve body. ------------------ Jeff Chambers Trophy Stock #3 11.462 Seconds / 117.43 MPH Chambers Racing Team