Exterior Paint

[John Z]

Anything that comes out of a spray can is a holding action. OK if that is what you want. Be sure to clean back to bare metal. Then treat with a rust preventive. I prefer Rass-O-Nill, available by mail order (http:\\www.autobodystore.com) but you can also use RustMort, I found this at NAPA. Use short hair fiber glass filler then body filler. Then prime and top coat. I would remove the door panel and treat the rust on the inside also. This is only a patch. To do the job right you should weld in a patch or replace the door skin.