URGENT!!! PLEASE HELP!!!

07-17-2001, 05:56 PM

Thanks Gearhead, you've been a TON of help lately. Thanks for that, I really appreciate it a lot.

$50-60 isn't bad. A lot less than I expected actually. I just have no clue where I would have to take/send it to have it cut and rebalanced. You said you had yours cut and rebalanced. Did you have to have yours cut when you did this job on your '68?

I'm reusing the drum brakes off my stock 8" rear now. The brake lines are new, the guy doing the exhaust work had to break one to do the tailpipes properly, but he gave us the exhaust tips for free so he made up for it. So the brakes are taken care of. No problem there.

I should just be able to get U-loints at the local Pronto or Napa right? 9" rears are pretty common so they should have them. If not they can order them for me.

------------------
'69 Coupe with 351W
=========================
Edelbrock RPM intake, Edelbrock RPM cam, Edelbrock 750 cfm carb, Edelbrock lifters, Edelbrock double roller timing chain, Edelbrock valve springs, Accel coil, Moroso Blue-Max wires, Hedman headers, 2 1/2" pipe, glasspacks, Flex fan, Lakewood traction bars, C4, 9" Currie on order, 290hp-stock heads
=========================
The Surgeon General didn't say anything about smoking your azz!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Urgent.....read This!!!	Kevin Price	Blue Oval Lounge	15	02-05-2003 01:11 PM
URGENT Suggestions on Bearings & Rings	jim_howard_pdx	Windsor Power	3	09-24-2002 09:12 PM
MAC Pullies OK, or would you recommend another? (a little on the urgent side)	95mustanggt	Windsor Power	3	05-24-2002 10:05 AM
Just Got gear installed!!!! Urgent	JamGtStang	Windsor Power	9	04-17-2001 08:50 AM
Urgent, please help...	Nicks5.0	Windsor Power	2	01-23-2001 09:55 PM

07-17-2001, 05:56 PM	#1
BennyBoy Guest Posts: n/a	Thanks Gearhead, you've been a TON of help lately. Thanks for that, I really appreciate it a lot. $50-60 isn't bad. A lot less than I expected actually. I just have no clue where I would have to take/send it to have it cut and rebalanced. You said you had yours cut and rebalanced. Did you have to have yours cut when you did this job on your '68? I'm reusing the drum brakes off my stock 8" rear now. The brake lines are new, the guy doing the exhaust work had to break one to do the tailpipes properly, but he gave us the exhaust tips for free so he made up for it. So the brakes are taken care of. No problem there. I should just be able to get U-loints at the local Pronto or Napa right? 9" rears are pretty common so they should have them. If not they can order them for me. ------------------ '69 Coupe with 351W ========================= Edelbrock RPM intake, Edelbrock RPM cam, Edelbrock 750 cfm carb, Edelbrock lifters, Edelbrock double roller timing chain, Edelbrock valve springs, Accel coil, Moroso Blue-Max wires, Hedman headers, 2 1/2" pipe, glasspacks, Flex fan, Lakewood traction bars, C4, 9" Currie on order, 290hp-stock heads ========================= The Surgeon General didn't say anything about smoking your azz!!