Will I see 340-350FWHP with this combo, please respond

Killercanary · 02-05-2001, 02:50 PM

Thanks guys, you're really getting my spirits up. One of the main reasons I have not bought heads until now is that I couldn't convince myself to shell out roughly 2 grand on heads, cam, MAF, injectors and stuff if I was only going to be at or around 300HP, or roughly 101 in the 1/4- especially since I'm at ~98.5mph now, that's a lot of money for only 3-4mph. My reasoning behind this is that a set of underdrive pulleys netted me 3mph! Most of the 94-95 coupes I've seen with heads, cam, intake, etc only run like 101-102mph, hell there are two SC 94-95 verts at my track that only turn like 100mph, one even runs with drag radials! This is why I'm obsessed with ~350HP, I want to run that 105mph or better MPH. I appreciate all the input from everyone, please keep it coming.

Dave- I haven't been to the track since it closed in October. My best pass was a 13.83 at 98.3mph with a 1.91 60', but 90% of all my passes now fall within 13.89-13.83, and my mph is always between 98.3-98.55. What kind of times are you running with that MPH? Those are really impressive numbers, I always wanted to venture down to Mason Dixon dragway or Englishtown NJ before I put the heads on because I'd run a lot better at both tracks in comparison to mine due to elevation. I have a pic of my timeslip on my webpage if you want to compare your to mine to see where you are picking up that MPH- I'm curious. My site is http://www.angelfire.com/pa2/killercanary. Drop me a line.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thoughts on Combo?	Rosco	Windsor Power	9	06-03-2004 06:07 PM
Anyone here run a similar combo and if so, what times did it run?	slowfive0	Power Adders	3	02-02-2004 01:39 AM
Carb Combo	86GT	Windsor Power	8	08-24-2002 07:23 PM
how's my combo??	blacksunshine88GT	Windsor Power	10	04-18-2001 05:42 PM
BAD @SS N/A 351w Combo? (Long)	BowTie Eater 5 Liter	Windsor Power	0	02-27-2001 10:47 PM

02-05-2001, 02:50 PM	#17
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Thanks guys, you're really getting my spirits up. One of the main reasons I have not bought heads until now is that I couldn't convince myself to shell out roughly 2 grand on heads, cam, MAF, injectors and stuff if I was only going to be at or around 300HP, or roughly 101 in the 1/4- especially since I'm at ~98.5mph now, that's a lot of money for only 3-4mph. My reasoning behind this is that a set of underdrive pulleys netted me 3mph! Most of the 94-95 coupes I've seen with heads, cam, intake, etc only run like 101-102mph, hell there are two SC 94-95 verts at my track that only turn like 100mph, one even runs with drag radials! This is why I'm obsessed with ~350HP, I want to run that 105mph or better MPH. I appreciate all the input from everyone, please keep it coming. Dave- I haven't been to the track since it closed in October. My best pass was a 13.83 at 98.3mph with a 1.91 60', but 90% of all my passes now fall within 13.89-13.83, and my mph is always between 98.3-98.55. What kind of times are you running with that MPH? Those are really impressive numbers, I always wanted to venture down to Mason Dixon dragway or Englishtown NJ before I put the heads on because I'd run a lot better at both tracks in comparison to mine due to elevation. I have a pic of my timeslip on my webpage if you want to compare your to mine to see where you are picking up that MPH- I'm curious. My site is http://www.angelfire.com/pa2/killercanary. Drop me a line. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.