Girlfriend puts it all over Eclipse

quick89gt · 02-13-2001, 11:50 AM

Z28EATER...i had the same problems when doing the springs on my buddy's car with his 4cylinder springs we put in the front...we ended up breaking one of the damn compressors from auto zone. anyways...we got it to fit in the best we good to where we thought we could maneuver the compressor out of the spring & a-arm and then BEAT it in with a 16lb. SLEDGE HAMMER. Worked just fine, and the spring compressor came right out. Nothin' like a little engineering.

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Straight smoked Eclipse	mak0341	Stang Stories	3	07-03-2003 08:06 PM
Raced a 98or 99 Eclipse	silverv6	Stang Stories	5	06-02-2002 10:12 PM
Got smoked by a 2000 Eclipse	silverv6	Stang Stories	65	03-13-2002 11:34 AM
1996 Cobra vs 1995 GT and an Eclipse	Milktasd	Stang Stories	10	02-04-2002 03:02 PM
My Cobra vs. Eclipse GS-T	StoplightWarrior	Stang Stories	5	12-12-2001 08:43 AM

02-13-2001, 11:50 AM	#5
quick89gt Registered Member Join Date: Apr 2000 Location: O'Fallon, IL Posts: 243	Z28EATER...i had the same problems when doing the springs on my buddy's car with his 4cylinder springs we put in the front...we ended up breaking one of the damn compressors from auto zone. anyways...we got it to fit in the best we good to where we thought we could maneuver the compressor out of the spring & a-arm and then BEAT it in with a 16lb. SLEDGE HAMMER. Worked just fine, and the spring compressor came right out. Nothin' like a little engineering. ------------------ *********************** '89 GT, T-5, Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears. ***********************