Need help in calculating high speed run potential...

[Dark_5.0]

Originally posted by jerryIII:
I checked some #'s on the net.. a CRX SI's engine is 1590cc/96 cu.in, weighs 2,174 lbs, @ 6000 rpm it produces 108 hp and 100 ft/lb of torque at 5000 rpm...


to reach 110 mph, the car needs 224 hp

to reach 130 mph, the car needs 369 hp

to reach 170 mph, the car would need 826 hp

if these #'s are accurate, there is no way... unless the guy installed a jet engine.

____________________________________________


Are you a phuckin idiot or what a 224hp crx would easily do 160.!!!!!!!!!!

And a 826hp crx would do way over 200mph "IN THE 1/4 mile"!!!!!!

You are a """Retard""""!!!! !!!!!!!!

Man did you sound dumb



------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires.
best 60 ft 2.14, best 1/8th 9.65, best 1/4 15.2 @89mph