rear end size?

84LX89GT · 07-26-2001, 12:51 AM

I have a 7.5" rear with traction-lok and 3.08 gears on my '84 5.0L and i think it was in '86 as lx mike said that they switched over to the 8.8". The 7.5" in my '84 has lasted 150,000 miles and i've done a few large burnouts, but i garauntee that if i went to a dragstrip and dumped the clutch at 4,000 or if i did anything with sticky tires like slicks that the rearend would blow up (axles shafts would strip, or bearing bolts break, or gears stipping, etc. etc.). In '87 Ford finally got the GT and 5.0L LX right by making them pretty heavy duty in most senses with the higher torque capacity World Class T5, 8.8" rear, bigger sway bars and brakes and previous year things like quad shocks (from '84) and sport valved struts and shocks as well as more aerodynamic styling.

fastang - quad shocks were first used on 7.5" rears on 5.0L models in mid-84, i've still got the stock ones on mine. the 2.3L 7.5" rears don't have provisions for the quad shocks (i think) and usually have higher gears like 3.45 or 3.73.

------------------
previous name: 84stangLX
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

[This message has been edited by 84LX89GT (edited 07-26-2001).]

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear end size?	Nixon1	Windsor Power	16	02-22-2003 03:15 PM
Rear tire size	lskarritt	Classic Mustangs	0	01-20-2003 07:42 PM
295 Rear rubber? What size rim/tire you run?	5P0INT0	Windsor Power	1	06-16-2002 06:48 AM
Rear tire size	Mopar1	Windsor Power	11	04-03-2002 01:00 AM
rear end size	68302	Classic Mustangs	4	11-23-2001 08:00 AM

07-26-2001, 12:51 AM	#6
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	I have a 7.5" rear with traction-lok and 3.08 gears on my '84 5.0L and i think it was in '86 as lx mike said that they switched over to the 8.8". The 7.5" in my '84 has lasted 150,000 miles and i've done a few large burnouts, but i garauntee that if i went to a dragstrip and dumped the clutch at 4,000 or if i did anything with sticky tires like slicks that the rearend would blow up (axles shafts would strip, or bearing bolts break, or gears stipping, etc. etc.). In '87 Ford finally got the GT and 5.0L LX right by making them pretty heavy duty in most senses with the higher torque capacity World Class T5, 8.8" rear, bigger sway bars and brakes and previous year things like quad shocks (from '84) and sport valved struts and shocks as well as more aerodynamic styling. fastang - quad shocks were first used on 7.5" rears on 5.0L models in mid-84, i've still got the stock ones on mine. the 2.3L 7.5" rears don't have provisions for the quad shocks (i think) and usually have higher gears like 3.45 or 3.73. ------------------ previous name: 84stangLX '84 Mustang 5.0 LX my LX '89 Mustang GT my GT [This message has been edited by 84LX89GT (edited 07-26-2001).]