Took my chances against a 00'GT

Smokedawg · 08-04-2001, 05:05 PM

FivePointO--
As anyone will tell you 347's need alot of air to breathe..And I am only running a STOCK upper and lower intake ported. I ran out of cash. I am now saving towards a new Edelbrock RPM.
I had him by a car in a half from 30 to 80. Thats not very far!

Someone here not to long ago said because of the shitty intake and cam I am prob only pushing like 280RWHP..Any guess's on what that new intake and custom ground cam will take me to?

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

[This message has been edited by Smokedawg (edited 08-04-2001).]

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'00GT vs. Mach I	blue00gt	Stang Stories	7	11-14-2003 03:37 PM
New best in my 00GT.......	lethrneck32	Modular Madness	1	02-02-2002 11:31 PM
How are my chances to win?	67GTACoupe	Stang Stories	4	02-02-2002 02:11 AM
00'GT vs. 01'Camaro SS	00'BlackSteed	Stang Stories	77	06-28-2001 03:06 AM

08-04-2001, 05:05 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	FivePointO-- As anyone will tell you 347's need alot of air to breathe..And I am only running a STOCK upper and lower intake ported. I ran out of cash. I am now saving towards a new Edelbrock RPM. I had him by a car in a half from 30 to 80. Thats not very far! Someone here not to long ago said because of the shitty intake and cam I am prob only pushing like 280RWHP..Any guess's on what that new intake and custom ground cam will take me to? ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del. [This message has been edited by Smokedawg (edited 08-04-2001).]