WS6 vs Sedanman

sedanman · 09-06-2001, 11:42 PM

Ok, I am still working the bugs out of the new combo, but I am driving it around tonight and I see a LS1 WS6 (M6)car so I give chase, it just so happens 2 kids are in it so I pull even and drop to third and give it a hop, he nails it so I hit it let off realize he hit it and slam it down, despite the jump I pull half a car to a car through 3rd and half to shut down before I could use 4th. The next time he falls back about a car and then nails it I wait till his front end gets to my door and I nail it and he pulls even with me, then I stop his momentum and began to pull but I had to shut down just as I shifted to 4th a little over a half car ahead. For some reason after that he did not want to play anymore

------------------
1991 Lx sedan 5.0, 5spd, TFS Heads, Cobra intake, TF Stage 1 cam, 1.6 rr's,73MM mass air, 65mm TB, FPR, 24lb injectors, , BBK Equal length headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies,electric fan, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5, A/C SP delete 255/50/16 BFG DR AL D/S
Old combo
13.2@105.5 (Gt40 heads, 156k miles, Ecam, stock rocker arms, Shorty headers)
New Combo (

gp001 · 09-06-2001, 11:45 PM

Nice kill ! What are the specs on that TFS Stage 1 cam?

sedanman · 09-07-2001, 12:10 AM

The specs on the cam are:

lift .499 int .510 exh
duration .050" is 221^ int 225^ exh

It should really love the 150 horse NX kit thats coming.

StoplightWarrior · 09-07-2001, 02:21 AM

Nice Kill!!! Can't wait till I can play with the LS1's!

------------------
Black 2000 GT
Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates.

Red 1994 Mustang Cobra #4343
Pulleys, Shorty Headers, K&N filter, short throw shifter.

09-07-2001, 01:34 PM

Playing w/ the big boys is fun......making them see your taillights is AWESOME! Nice kill.

------------------
'90 LX 5.0;12K original miles (no sh*&);3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside welded subs;9" K&N cone filter charger;Hurst shifter;Cervini's 3" turbo hood;A/C delete; gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS chip; Holley 190lb fp;TFS track heat Intake (12.299 @ 113 - 1.78 60')

09-06-2001, 11:42 PM	#1
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	WS6 vs Sedanman Ok, I am still working the bugs out of the new combo, but I am driving it around tonight and I see a LS1 WS6 (M6)car so I give chase, it just so happens 2 kids are in it so I pull even and drop to third and give it a hop, he nails it so I hit it let off realize he hit it and slam it down, despite the jump I pull half a car to a car through 3rd and half to shut down before I could use 4th. The next time he falls back about a car and then nails it I wait till his front end gets to my door and I nail it and he pulls even with me, then I stop his momentum and began to pull but I had to shut down just as I shifted to 4th a little over a half car ahead. For some reason after that he did not want to play anymore ------------------ 1991 Lx sedan 5.0, 5spd, TFS Heads, Cobra intake, TF Stage 1 cam, 1.6 rr's,73MM mass air, 65mm TB, FPR, 24lb injectors, , BBK Equal length headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies,electric fan, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5, A/C SP delete 255/50/16 BFG DR AL D/S Old combo 13.2@105.5 (Gt40 heads, 156k miles, Ecam, stock rocker arms, Shorty headers) New Combo (

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sedanman vs 03 Cobra	sedanman	Stang Stories	16	08-03-2002 06:16 PM
Sedanman Vs Modded C5	sedanman	Stang Stories	5	09-26-2001 08:36 PM
Sedanman vs Modded LS1	sedanman	Stang Stories	6	04-16-2001 03:12 PM
sedanman vs 11sec LX	sedanman	Stang Stories	3	03-16-2001 12:53 AM
clean hatch takes on sedanman	sedanman	Stang Stories	0	02-20-2001 04:41 PM

09-06-2001, 11:45 PM	#2
gp001 Registered Member Join Date: Nov 2000 Location: So. Cal. Posts: 244	Nice kill ! What are the specs on that TFS Stage 1 cam?

09-07-2001, 12:10 AM	#3
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	The specs on the cam are: lift .499 int .510 exh duration .050" is 221^ int 225^ exh It should really love the 150 horse NX kit thats coming.

09-07-2001, 02:21 AM	#4
StoplightWarrior Registered Member Join Date: Jun 2000 Location: Nor-Cal Posts: 1,311	Nice Kill!!! Can't wait till I can play with the LS1's! ------------------ Black 2000 GT Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates. Red 1994 Mustang Cobra #4343 Pulleys, Shorty Headers, K&N filter, short throw shifter.

09-07-2001, 01:34 PM	#5
bada$$lx Guest Posts: n/a	Playing w/ the big boys is fun......making them see your taillights is AWESOME! Nice kill. ------------------ '90 LX 5.0;12K original miles (no sh*&);3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside welded subs;9" K&N cone filter charger;Hurst shifter;Cervini's 3" turbo hood;A/C delete; gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS chip; Holley 190lb fp;TFS track heat Intake (12.299 @ 113 - 1.78 60')