How Fast?

Streetracerer2k1 · 09-11-2001, 09:42 AM

Sup all,

I got a question, which car do you think would run faster with these mods, a 95 GT with a 347 Stroker, Vortech S-trim, Stage 3 ported canfield alum heads, stage 3 ported holly intake, stage 3 custom grind cam, billet adjustibal reg, BBK 1-5/8 shorty headers, bullet 75mm mass air meter, 30 lb SVo injectors, 150 shot of giggle gas

VS
2001 Cobra with the same mods

exgmguy · 09-11-2001, 12:38 PM

canfield does not make heads for a 4.6 Cobra, nor does Holley make an intake.

------------------
1988 Mustang GT
11.8 @ 123 (7/14/01)
11.6 @ 116 with a melted plug! (9/8/01)
1992 BadAzz Wrangler
1993 Explorer

See my car at: www.mustangworks.com/cgi-bin/moi-display.cgi?179

Unit 5302 · 09-11-2001, 01:25 PM

Still depends. The stock HO block won't take that kind of power. The stock Cobra axles won't take that kind of power.

How high are you going to rev them?

Streetracerer2k1 · 09-11-2001, 07:07 PM

Thank you for correcting me, what would be the equivlent to those parts, or a part that you recommend, and what would you suggest for a different block/axel, how much power would this be generating? and im thinking shifting at redline for drag strip, sry again for mistakes about parts i was just kinda shopping on a catalog with a buddy and thats what we decided for parts

Steven

09-11-2001, 09:42 AM	#1
Streetracerer2k1 Registered Member Join Date: Jul 2001 Location: Paso Robles, Ca, USA Posts: 24	How Fast? Sup all, I got a question, which car do you think would run faster with these mods, a 95 GT with a 347 Stroker, Vortech S-trim, Stage 3 ported canfield alum heads, stage 3 ported holly intake, stage 3 custom grind cam, billet adjustibal reg, BBK 1-5/8 shorty headers, bullet 75mm mass air meter, 30 lb SVo injectors, 150 shot of giggle gas VS 2001 Cobra with the same mods

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FAST vs. Chip	STEEDAJEFF	Windsor Power	1	09-29-2002 02:16 PM
new to fast mustangs but not fast cars...I've a few ?'s	XGN	Windsor Power	3	07-03-2002 09:40 AM
Are these fast??	Dark_5.0	Stang Stories	13	05-16-2002 01:19 PM
Super cars and Fast and the Furious	#1 Pony	Blue Oval Lounge	9	01-29-2002 12:54 AM
Pesky Supra, actually thought he had a fast car.	Unit 5302	Stang Stories	7	03-20-2001 01:34 PM

09-11-2001, 12:38 PM	#2
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	canfield does not make heads for a 4.6 Cobra, nor does Holley make an intake. ------------------ 1988 Mustang GT 11.8 @ 123 (7/14/01) 11.6 @ 116 with a melted plug! (9/8/01) 1992 BadAzz Wrangler 1993 Explorer See my car at: www.mustangworks.com/cgi-bin/moi-display.cgi?179

09-11-2001, 01:25 PM	#3
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	Still depends. The stock HO block won't take that kind of power. The stock Cobra axles won't take that kind of power. How high are you going to rev them?

09-11-2001, 07:07 PM	#4
Streetracerer2k1 Registered Member Join Date: Jul 2001 Location: Paso Robles, Ca, USA Posts: 24	Thank you for correcting me, what would be the equivlent to those parts, or a part that you recommend, and what would you suggest for a different block/axel, how much power would this be generating? and im thinking shifting at redline for drag strip, sry again for mistakes about parts i was just kinda shopping on a catalog with a buddy and thats what we decided for parts Steven