Killed my motor at the track....BAD NEWS!!!

[Rick 91GT]

I would strongly suggest looking at one of Anderson Blower grinds for that new combo. His cam did a ton for my combo. I can't imagagine a Stage III Holley as it already flows way to much. My heads are going to TEA this winter for a Stage II port job should come back with over 300cfm intake and 2xxcfm should make a difference I hope.

Glad to see it was only a vac leak causing all that lost boost, so how much do you actually see now?

Good Luck

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
<B>12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree

[This message has been edited by Rick 91GT (edited 09-27-2001).]