bfg drags, weld draglights, MT slick question??

LX XLR8R · 02-27-2001, 02:34 PM

yea you can mount 10" slicks on stock wheels..i will be putting these slicks on 10 holes till i can afford another pair of draglights for them..yes to answer your question we ran the welds on my buddies car with those slicks with no problem and he had quads..i dont have quads on the car they are now..if you need an extra 1/2" or so clearance then rotate the quads upsidedown..if not then get upper and lower control arms and delete the quads..the only reason ford put quads in thier cars is cuz the made the control arms 2 flimsly and they flex with makes the rear end bind witch in return creates wheel hop..

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What size weld wheel to get a 26x10 inch slick on an 84 hatch	ciara	Windsor Power	3	09-23-2003 09:55 PM
WELD WHEEL QUESTION on backspacing- your advice	Spenc2u	Windsor Power	0	01-16-2002 03:23 PM

02-27-2001, 02:34 PM	#3
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	yea you can mount 10" slicks on stock wheels..i will be putting these slicks on 10 holes till i can afford another pair of draglights for them..yes to answer your question we ran the welds on my buddies car with those slicks with no problem and he had quads..i dont have quads on the car they are now..if you need an extra 1/2" or so clearance then rotate the quads upsidedown..if not then get upper and lower control arms and delete the quads..the only reason ford put quads in thier cars is cuz the made the control arms 2 flimsly and they flex with makes the rear end bind witch in return creates wheel hop.. ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..