© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-09-2001, 09:45 PM | #1 |
Registered Member
Join Date: Oct 2001
Location: PA, USA
Posts: 19
|
supercharger
i was wondering if someone could tell me what mods i need to have before installing a supercharger or can it just be bloted on to a stock setup?
------------------ 1999 mustang GT 2.5 MAC Cat-back K&N filter |
11-10-2001, 02:45 AM | #2 |
Registered Member
Join Date: Oct 2001
Location: Spring, Texas
Posts: 2
|
Depends on the kit. Most of the kits come pretty complete, so you don't need much else. However, you might consider exhaust and possibly an different air-meter. My car didn't really come alive until I dropped the 3.73 gears in it.
Also, be very aware of your fuel system. The stock fuel system is anemic at best. You'll want to step up your injectors to a MINIMUM of 30# and replace your intank pump with a Walbro 255lph or equivilent. Also, the pickup in your tank has an 1/8 check-valve. Ever try to breath through a straw??? Get that fixed while you're at it. Get the car dynoed using an air/fuel meter to be sure you're not leaning out. Have someone who knows what they're listening for check for detonation. Good luck! ------------------ Tracy C. <IMG SRC="http://www.equusit.com/images/YesItsFast02.gif"> Bottles are for babies... Real men get blown! [This message has been edited by YesItsFast (edited 11-10-2001).] |
11-10-2001, 01:07 PM | #3 |
Registered Member
Join Date: Oct 2001
Location: PA, USA
Posts: 19
|
hey thanks for the info! also i was wondering what is the max psi a stock 4.6 motor can take?
------------------ 1999 mustang GT 2.5 MAC Cat-back K&N filter |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roots supercharger (like Kenne Bell)....who offers them? | 84LX89GT | Windsor Power | 10 | 08-10-2006 06:23 PM |
96 Cobra Supercharger questions | mosibobo | Modular Madness | 8 | 08-09-2006 01:50 PM |
FMU and Supercharger Pulley Question | NitroNixon | Windsor Power | 3 | 05-14-2003 08:06 PM |
Want Supercharger But have 9.8:1 comp. is this trouble? | NewAge 5.0 | Windsor Power | 4 | 12-18-2002 08:50 AM |
Paxton Supercharger Guys LOOK | 89 Cobra LX | Windsor Power | 1 | 06-11-2002 03:10 PM |